LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD

TI BQ25185DLHR

Fabricante
Cód. da peça
BQ25185DLHR
Nº LCSC
C19725033
Emb.
WSON-10-EP(2.2x2)
Número do Cliente
Atrib. princ.
1-Cell, 1-A Standalone Linear Battery Charger with PowerPath, Factory Mode, and Battery Tracking VINDPM
Folha de DadosTI BQ25185DLHR
Conformidade RoHS2 documentos disponíveis
Garantia em cada pedido
100% Autêntico · Devolução ou Substituição em 30 Dias

Especificações do Produto

Tudo
TipoDescrição
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Battery Chargers
FabricanteTI
Emb.WSON-10-EP(2.2x2)
End-Off Voltage2.2V
Voltage - Supply3V~18V
Quiescent Current4uA
Operating Temperature-40℃~+125℃
Number of Cells1
Interface-
Features-
Battery Temperature DetectionSupport
0V Battery Charge-
Type of BatteryLithium Battery;LiFePO4 Battery
The Chip TypeCharging IC
Balance Current-
Charge Current - Max1A
Charging Saturation Voltage4.4V

Descrição

Tradução por IA

The BQ25185 is a linear battery charger IC focusing on small solution size and low quiescent current for extending battery life. The device is available in a leadless, small package with a thermal pad giving thermal performance. The device can support up to 1-A charging and system loads of up to 3.125 A. The battery is charged using a standard Li-ion or LiFePO4 charge profile with three phases: precharge, constant current and constant voltage. Thermal regulation provides the maximum charge current while managing the device temperature. The charger is also optimized for battery to battery charging with 3-V minimum input voltage operation and can withstand 25-V absolute maximum line transients. The device integrates a single push-button input to reduce the total solution footprint.

Recursos

Tradução por IA
  • 1-A linear battery charger
  • 3.0-V to 18-V input voltage operating range
  • 25-V tolerant input voltage
  • External resistor programmable operation: ILIM/VSET sets battery regulation voltage to 3.6V, 3.65 V, 4.02 V, 4.1V, 4.2 V, 4.35 V, or 4.4 V; ILIM/VSET sets input current limit to 100 mA, 500 mA, or 1100 mA; ISET to set charge current from 5 mA to 1 A
  • Li-ion, Li-Poly, and LiFePO4 chemistries support
  • 115-mΩ battery FET ON resistance
  • Up to 3.125-A discharge current to support high system loads
  • Power path management for powering the system and charging the battery
  • Regulated system voltage (SYS) at 4.5 V
  • Configurable input current limit
  • USB Suspend mode supported
  • Battery Tracking input voltage dynamic power management (VINDPM) for high impedance input sources
  • Dynamic power path management optimizes charging from weak adapters
  • Ultra low quiescent current
  • 4 μA in Battery Only mode
  • 30 μA Input adapter Iq in sleep mode
  • 3.2 μA Battery discharge current in Factory Mode
  • Integrated fault protection
  • Input overvoltage protection (VIN_OVP)
  • Battery undervoltage protection (BUVLO)
  • Battery short protection (BATSC)
  • Battery overcurrent protection (BATOCP)
  • Input current limit protection (ILIM)
  • Thermal regulation (TREG) and thermal shutdown (TSHUT)
  • Battery thermal fault protection (TS)
  • Safety timer fault
  • ISET and ILIM/VSET pin short/open protection

Aplicações

Tradução por IA
  • TWS headset and charging case
  • Smart glasses, AR and VR
  • Smart watches and other wearable devices
  • Retail automation and payment
  • Building automation