Littelfuse SP721ABTG
| Fabricante | |
| Cód. da peça | SP721ABTG |
| Nº LCSC | C17272510 |
| Emb. | SOIC-8 |
| Número do Cliente | |
| Atrib. princ. | TVS Diode Arrays General Purpose ESD Protection |
| Folha de Dados | Littelfuse SP721ABTG |
Especificações do Produto
| Tipo | Descrição | |
|---|---|---|
| Categoria | Circuit Protection/Transient Voltage Suppressors (TVS)/Mixed Technology | |
| Fabricante | Littelfuse | |
| Emb. | SOIC-8 | |
| Clamping Voltage | - | |
| Peak Pulse Current (Ipp) | 3A@8/20us | |
| Operating temperature | -40℃~+105℃ | |
| Capacitance | 3pF | |
| Polarity | Unidirectional | |
| Reverse Stand-Off Voltage (Vrwm) | - | |
| Number of Channels | 6 | |
| Type | TVS |
| Tipo | Descrição | |
|---|---|---|
| Categoria | Circuit Protection/Transient Voltage Suppressors (TVS)/Mixed Technology | |
| Fabricante | Littelfuse | |
| Emb. | SOIC-8 | |
| Clamping Voltage | - | |
| Peak Pulse Current (Ipp) | 3A@8/20us | |
| Operating temperature | -40℃~+105℃ |
| Tipo | Descrição | |
|---|---|---|
| Capacitance | 3pF | |
| Polarity | Unidirectional | |
| Reverse Stand-Off Voltage (Vrwm) | - | |
| Number of Channels | 6 | |
| Type | TVS |
Descrição
The SP721 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection to sensitive input circuits. The SP721 has 2 protection SCR/Diode device structures per input. There are a total of 6 available inputs that can be used to protect up to 6 external signal or bus lines. Overvoltage protection is from the IN (Pins 1 - 3 and Pins 5 - 7) to V+ or V-. The SCR structures are designed for fast triggering at a threshold of one +VBE diode threshold above V+ (Pin 8) or a -VBE diode threshold below V- (Pin 4). From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one VBE above V+. A similar clamp to V- is activated if a negative pulse, one VBE less than V-, is applied to an IN input. Standard ESD Human Body Model (HBM) Capability is:
Recursos
- ESD Interface Capability for HBM Standards - MIL STD 3015.7...15kV - IEC 61000-4-2, Direct Discharge, - Single Input... 4kV (Level 2) - Two Inputs in Parallel.. 8kV (Level 4) - IEC 61000-4-2, Air Discharge.... 15kV (Level 4)
- High Peak Current Capability - IEC 61000-4-5 (8/20µs)...... ±3A - Single Pulse, 100µs Pulse Width...... ±2A - Single Pulse, 4µs Pulse Width...... ±5A
- Designed to Provide Over-Voltage Protection - Single-Ended Voltage Range to...... +30V - Differential Voltage Range to...... ±15V
- Fast Switching...... 2ns Rise Time
- Low Input Leakages... 1nA at 25°C Typical
- Low Input Capacitance... 3pF Typical
- An Array of 6 SCR/Diode Pairs
- Operating Temperature Range... -40°C to 105°C
Aplicações
- Microprocessor/Logic Input Protection
- Analog Device Input Protection
- Data Bus Protection
- Voltage Clamp
Especificações do Produto
| Tipo | Descrição | |
|---|---|---|
| Categoria | Circuit Protection/Transient Voltage Suppressors (TVS)/Mixed Technology | |
| Fabricante | Littelfuse | |
| Emb. | SOIC-8 | |
| Clamping Voltage | - | |
| Peak Pulse Current (Ipp) | 3A@8/20us | |
| Operating temperature | -40℃~+105℃ | |
| Capacitance | 3pF | |
| Polarity | Unidirectional | |
| Reverse Stand-Off Voltage (Vrwm) | - | |
| Number of Channels | 6 | |
| Type | TVS |
| Tipo | Descrição | |
|---|---|---|
| Categoria | Circuit Protection/Transient Voltage Suppressors (TVS)/Mixed Technology | |
| Fabricante | Littelfuse | |
| Emb. | SOIC-8 | |
| Clamping Voltage | - | |
| Peak Pulse Current (Ipp) | 3A@8/20us | |
| Operating temperature | -40℃~+105℃ |
| Tipo | Descrição | |
|---|---|---|
| Capacitance | 3pF | |
| Polarity | Unidirectional | |
| Reverse Stand-Off Voltage (Vrwm) | - | |
| Number of Channels | 6 | |
| Type | TVS |
Descrição
The SP721 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection to sensitive input circuits. The SP721 has 2 protection SCR/Diode device structures per input. There are a total of 6 available inputs that can be used to protect up to 6 external signal or bus lines. Overvoltage protection is from the IN (Pins 1 - 3 and Pins 5 - 7) to V+ or V-. The SCR structures are designed for fast triggering at a threshold of one +VBE diode threshold above V+ (Pin 8) or a -VBE diode threshold below V- (Pin 4). From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one VBE above V+. A similar clamp to V- is activated if a negative pulse, one VBE less than V-, is applied to an IN input. Standard ESD Human Body Model (HBM) Capability is:
Recursos
- ESD Interface Capability for HBM Standards - MIL STD 3015.7...15kV - IEC 61000-4-2, Direct Discharge, - Single Input... 4kV (Level 2) - Two Inputs in Parallel.. 8kV (Level 4) - IEC 61000-4-2, Air Discharge.... 15kV (Level 4)
- High Peak Current Capability - IEC 61000-4-5 (8/20µs)...... ±3A - Single Pulse, 100µs Pulse Width...... ±2A - Single Pulse, 4µs Pulse Width...... ±5A
- Designed to Provide Over-Voltage Protection - Single-Ended Voltage Range to...... +30V - Differential Voltage Range to...... ±15V
- Fast Switching...... 2ns Rise Time
- Low Input Leakages... 1nA at 25°C Typical
- Low Input Capacitance... 3pF Typical
- An Array of 6 SCR/Diode Pairs
- Operating Temperature Range... -40°C to 105°C
Aplicações
- Microprocessor/Logic Input Protection
- Analog Device Input Protection
- Data Bus Protection
- Voltage Clamp
Conformidade & Códigos de Exportação
| Tipo | Detalhes |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541100000 |
| USHTS | 8541100040 |
| TARIC | 8541100000 |
| CAHTS | 8541100090 |
| BRHTS | 85411011 |
| INHTS | 85411000 |
| MXHTS | 8541.10.01 |
| Tipo | Detalhes |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541100000 |
| USHTS | 8541100040 |
| TARIC | 8541100000 |
| Tipo | Detalhes |
|---|---|
| CAHTS | 8541100090 |
| BRHTS | 85411011 |
| INHTS | 85411000 |
| MXHTS | 8541.10.01 |



