- Pinout Diagram
- Footprint Diagram
ST ST485CDR
| Manufacturer | |
| MPN | ST485CDR |
| LCSC Part # | C970563 |
| Packaging | SO-8 |
| Customer # | |
| Key Attributes | Low power RS-485/RS-422 transceiver |
| Datasheet |  ST ST485CDR |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ST | |
| Packaging | SO-8 | |
| Voltage - Supply | 4.75V~5.25V | |
| Type | Transceiver | |
| Data Rate | 2.5Mbps | |
| Number of Nodes | 64 | |
| Operating Temperature | 0℃~+70℃ | |
| Number of Drivers | 1 | |
| Duplex | Half-Duplex | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection;Thermal shutdown protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 300uA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 2500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The ST485 is a low power transceiver for RS-485 and RS-422 communication. Each part contains one driver and one receiver. This transceiver consumes 300 μA current when unloaded and typically less when loaded. It operates on a single 5 V supply. Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the unused outputs in a high-impedance state. The ST485 is designed for bidirectional (half-duplex applications).
Features
- 300 μA
- Operate from a single 5 V
- Current limiting and thermal shutdown
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 0.5684 | $ 0.57 |
| 10+ | $ 0.4651 | $ 4.65 |
| 30+ | $ 0.4134 | $ 12.40 |
| 100+ | $ 0.3617 | $ 36.17 |
| 500+ | $ 0.2874 | $ 143.70 |
| 1,000+ | $ 0.2713 | $ 271.30 |
Standard Packaging2500/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | ST | |
| Packaging | SO-8 | |
| Voltage - Supply | 4.75V~5.25V | |
| Type | Transceiver | |
| Data Rate | 2.5Mbps | |
| Number of Nodes | 64 | |
| Operating Temperature | 0℃~+70℃ | |
| Number of Drivers | 1 | |
| Duplex | Half-Duplex | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection;Thermal shutdown protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 300uA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 2500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The ST485 is a low power transceiver for RS-485 and RS-422 communication. Each part contains one driver and one receiver. This transceiver consumes 300 μA current when unloaded and typically less when loaded. It operates on a single 5 V supply. Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the unused outputs in a high-impedance state. The ST485 is designed for bidirectional (half-duplex applications).
Features
- 300 μA
- Operate from a single 5 V
- Current limiting and thermal shutdown
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |