TI TPS57140QDGQRQ1

The TPS57140-Q1 device is a 42-V, 1.5-A step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no-load, regulated output supply current to 116 μA. When the enable pin is in the low state, the shutdown current is reduced to 1.5 μA. Undervoltage lockout is internally set at 2.5 V, but can be increased using the enable pin. The output voltage startup ramp is controlled by the slow-start pin that can also be configured for sequencing or tracking. An open-drain power-good signal indicates the output is within 92% to 109% of its nominal voltage. A wide switching-frequency range allows optimization of efficiency and external component size. Frequency foldback and thermal shutdown protect the part during an overload condition. The TPS57140-Q1 is available in a 10-pin thermally enhanced MSOP-PowerPAD package (DGQ) and a 10-pin VSON package (DRC).

• Qualified for Automotive Applications
• AEC-Q100 Qualified with the Following Results:
  • Device Temperature Grade 1: -40°C to +125°C
  • Device HBM ESD Classification Level 2
  • Device CDM ESD Classification Level C4B
• 3.5-V to 42-V Input Voltage Range
• 200 mΩ High-Side MOSFET
• High Efficiency at Light Loads With PulseSkipping Eco-mode Control Scheme
• 116 μA Operating Quiescent Current
• 1.5 μA Shutdown Current
• 100-kHz to 2.5-MHz Switching Frequency
• Synchronizes to External Clock
• Adjustable Slow Start and Sequencing
• Undervoltage and Overvoltage Power-Good Output
• Adjustable Undervoltage Lockout Voltage and Hysteresis
• 0.8-V Internal Voltage Reference
• Supported by SwitcherPro Software Tool

• 12-V and 24-V Industrial and Commercial Low Power Systems
• Automotive Infotainment, Head Unit, Display Navigation, Audio and Clusters
• Automotive Body Applications, HVAC, Wireless Charging
• Advanced Driver-Assistance System (ADAS), Rear-View Camera Module, Blind Spot Radar
• Industrial DC Power Systems