MAXIM MAX2091ETP+T

The MAX2091 monolithic SiGe BiCMOS upconverter IC integrates an analog variable-gain amplifier (VGA) with an upconverting mixer stage and image filter. The device amplifies IF signals in the 250MHz to 450MHz range before mixing them with an LO signal. The resulting 1735MHz to 1935MHz upconverted signal is then filtered on-chip as the final stage of signal conditioning. For a broadband variant that does not include the image filter, refer to the MAX2091B. The analog attenuator is controlled by an external analog control voltage. Device features include 23dB gain (no attenuation), 5.4dB NF (no attenuation, including attenu­ ator insertion loss), and +24.5 dBm OIP3. Each of these features makes the MAX2091 an ideal upconverter for numerous transmitter applications. When paired with the MAX2092 RF VGA, a complete 2-chip IF-RF signal con­ ditioning solution is possible for microwave point-to-point transmitter applications. The MAX2091 operates from a single 5V supply, and is available in a compact 20-pin TQFN package (5mm x 5mm) with an exposed pad. Electrical performance is guaranteed over the extended temperature range from TC=-40°C to +95°C.

• Complete Upconversion in a Single IC
• 50MHz to 500MHz Analog VGA
• 1735MHz to 1935MHz Upconverter Mixer
• On-Chip LO Buffer
• Image Filter
• High Linearity
• +24.5dBm OIP3
• +12dBm Output -1dB Compression Point
• 23dB Gain
• 37dB IF Attenuator Control Range
• 5.4dB Noise Figure (Includes Attenuator Insertion Loss)
• 0.25dB Gain Variation Over 100MHz Bandwidth
• Analog Attenuator Controlled with External Voltage
• Alarm Circuit with Adjustable Threshold
• 20dB Image Rejection at 1135MHz RF Frequency
• Single +5V Supply with Extended +4.75V to +5.8V Supply Range
• Lead(Pb)-Free Package
• Power-Down Capabilities

• Microwave Point-to-Point Transmitters
• IF Variable-Gain Stages
• Temperature Compensation Circuits
• Cellular Applications
• WiMAX Applications
• LTE Applications
• Fixed Broadband Wireless Access
• Wireless Local Loop