ADI LTC5598IUF

A direct I/Q modulator designed for high performance wireless applications, including wireless infrastructure. It allows direct modulation of an RF signal using differential baseband I and Q signals. It supports point-to-point microwave link, GSM, EDGE, CDMA, 700MHz band LTE, CDMA2000, CATV applications and other systems. It may also be configured as an image reject upconverting mixer, by applying 90° phase-shifted signals to the I and Q inputs.

The I/Q baseband inputs consist of voltage-to-current converters that in turn drive double-balanced mixers. The outputs of these mixers are summed and applied to a buffer, which converts the differential mixer signals to a 50Ω single-ended buffered RF output. The four balanced I and Q baseband input ports are intended for DC coupling from a source with a common-mode voltage level of about 0.5V. The LO path consists of an LO buffer with single-ended or differential inputs, and precision quadrature generators that produce the LO drive for the mixers. The supply voltage range is 4.5V to 5.25V, with about 168mA current.

• Frequency Range: 5MHz to 1600MHz
• High Output IP3: +27.70dBm at 140MHz +22.90dBm at 900MHz
• Low Output Noise Floor at 6MHz Offset: No Baseband AC Input: –161.2dBm/Hz P0UT = 5.5 dBm: –160dBm/Hz
• Low LO Feedthrough: –55dBm at 140MHz
• High Image Rejection: –50.4dBc at 140MHz
• Integrated LO Buffer and LO Quadrature Phase Generator
• 50Ω Single-Ended LO and RF Ports

• 400MHz Baseband Bandwidth

• 24-Lead QFN 4mm × 4mm Package
• Pin-Compatible with Industry Standard Pin-Out
• Shut-down Mode

• Point-to-Point Microwave Link
• Basestation Transmitter
• GSM/EDGE/CDMA2K
• 700MHz LTE Basestation Transmitter
• CATV/Cable Broadband Modulator
• 13.56MHz/UHF RFID Modulator