- Pinout
- Footprint
TOSHIBA 74VHCT125AFT(BJ)
| Manufacturer | |
| MPN | 74VHCT125AFT(BJ) |
| LCSC Part # | C7421304 |
| Packaging | TSSOP14B |
| Customer # | |
| Key Attributes | CMOS Digital Integrated Circuits Quad Bus Buffer, Non-Inverted 3-State Outputs |
| Datasheet |  TOSHIBA 74VHCT125AFT(BJ) |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TOSHIBA | |
| Packaging | TSSOP14B | |
| Input type | - | |
| Voltage - Supply | 4.5V~5.5V | |
| Output Type | Tri-State | |
| Current - Output High(IOH) | 8mA | |
| Series | 74VHCT | |
| Operating Temperature | -40℃~+125℃ | |
| Current - Output Low(IOL) | 8mA | |
| Number of Bits per Element | - | |
| Channel Type | Unidirectional | |
| Features | Power-off isolation;Level shifting | |
| Number of Elements | 4 | |
| Propagation Delay | 3.8ns@5V,15pF | |
| Quiescent Current | 4uA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 2500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The 74VHCT125AFT and 74VHCT126AFT are high speed CMOS QUAD BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The 74VHCT125AFT requires the 3 - state control input G to be set high to place the output into the high impedance state, whereas the 74VHCT126AFT requires the control input G to be set low to place the output into high impedance. The input voltage are compatible with TTL output voltage. Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins without regard to the supply voltage. There structure prevents device destruction due to mismatched supply and input/ output voltages such as battery back up, hot board insertion, etc.
Features
- AEC - Q100 (Rev. H)
- Wide operating temperature range: Topr = -40 to 125 ℃
- High speed: Propagation delay time = 3.8 ns (typ.) at VCC = 5.0 V
- Quiescent supply current: ICC = 4.0 μA (max) at Ta = 25 ℃
- Compatible with TTL input: VIL = 0.8 V (max), VIH = 2.0 V (min)
- Power down protection is provided on all inputs and outputs.
- Balanced propagation delays: tPLI ≈ tPHL
- Low noise: ΔVOLP = 0.8 V (max)
- Pin and function compatible with the 74 series (ACT/HCT/AHCT etc.) 125/126 type.
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 0.2367 | $ 0.24 |
| 10+ | $ 0.2318 | $ 2.32 |
| 30+ | $ 0.2286 | $ 6.86 |
| 100+ | $ 0.2238 | $ 22.38 |
Standard Packaging2500/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Buffers, Drivers, Receivers, Transceivers | |
| Manufacturer | TOSHIBA | |
| Packaging | TSSOP14B | |
| Input type | - | |
| Voltage - Supply | 4.5V~5.5V | |
| Output Type | Tri-State | |
| Current - Output High(IOH) | 8mA | |
| Series | 74VHCT | |
| Operating Temperature | -40℃~+125℃ | |
| Current - Output Low(IOL) | 8mA | |
| Number of Bits per Element | - | |
| Channel Type | Unidirectional | |
| Features | Power-off isolation;Level shifting | |
| Number of Elements | 4 | |
| Propagation Delay | 3.8ns@5V,15pF | |
| Quiescent Current | 4uA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 2500 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The 74VHCT125AFT and 74VHCT126AFT are high speed CMOS QUAD BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The 74VHCT125AFT requires the 3 - state control input G to be set high to place the output into the high impedance state, whereas the 74VHCT126AFT requires the control input G to be set low to place the output into high impedance. The input voltage are compatible with TTL output voltage. Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins without regard to the supply voltage. There structure prevents device destruction due to mismatched supply and input/ output voltages such as battery back up, hot board insertion, etc.
Features
- AEC - Q100 (Rev. H)
- Wide operating temperature range: Topr = -40 to 125 ℃
- High speed: Propagation delay time = 3.8 ns (typ.) at VCC = 5.0 V
- Quiescent supply current: ICC = 4.0 μA (max) at Ta = 25 ℃
- Compatible with TTL input: VIL = 0.8 V (max), VIH = 2.0 V (min)
- Power down protection is provided on all inputs and outputs.
- Balanced propagation delays: tPLI ≈ tPHL
- Low noise: ΔVOLP = 0.8 V (max)
- Pin and function compatible with the 74 series (ACT/HCT/AHCT etc.) 125/126 type.
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |