NTE Electronics NTE4868
| Manufacturer | |
| MPN | NTE4868 |
| LCSC Part # | C7250349 |
| Packaging | - |
| Customer # | |
| Key Attributes | 103VC Clamp TVS DIODE |
| Datasheet |  NTE Electronics NTE4868 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Circuit Protection/Transient Voltage Suppressors (TVS)/TVS Diodes | |
| Manufacturer | NTE Electronics | |
| Packaging | - | |
| Clamping Voltage | 103V | |
| Operating Temperature | -55℃~+175℃ | |
| Peak Pulse Current (Ipp) | 49A@10/1000us | |
| Peak Pulse Power Dissipation (Ppp) | 5kW@10/1000us | |
| Voltage - Breakdown | 71.1V | |
| type | TVS | |
| Polarity | Unidirectional | |
| Reverse Leakage Current (Ir) | 10uA | |
| Reverse Stand-Off Voltage (Vrwm) | 64V |
| Type | Description | |
|---|---|---|
| Category | Circuit Protection/Transient Voltage Suppressors (TVS)/TVS Diodes | |
| Manufacturer | NTE Electronics | |
| Packaging | - | |
| Clamping Voltage | 103V | |
| Operating Temperature | -55℃~+175℃ | |
| Peak Pulse Current (Ipp) | 49A@10/1000us |
| Type | Description | |
|---|---|---|
| Peak Pulse Power Dissipation (Ppp) | 5kW@10/1000us | |
| Voltage - Breakdown | 71.1V | |
| type | TVS | |
| Polarity | Unidirectional | |
| Reverse Leakage Current (Ir) | 10uA | |
| Reverse Stand-Off Voltage (Vrwm) | 64V |
Introduction
The NTE4800 Series of high power transient suppressors are Silicon PN Junction devices designed for absorbtion of high voltage transients associated with power disturbances, switching and induced lighting effects. These devices were designed to be used on the output of switching power supplies and may be used to replace crowbar circuits. They are able to withstand high levels of peak current while allowing a circuit breaker to trip of a fuse to blow before shorting. This will enable the user to reset the breaker or replace the fuse and continue operation. For this type of operation, it is recommended that a sufficient mounting surface be used for dissipating the heat generated by the device during the transient or overvoltage condition.
Features
- Glass Passivated Junction
- 5000W Peak Pulse Power Capability on 10/1000μs Waveform
- Repetition Rate (Duty Cycle): 0.05%
- Low Incremental Surge Resistance
- Fast Response Time
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 10.5351 | $ 10.54 |
| 200+ | $ 4.2038 | $ 840.76 |
| 500+ | $ 4.0628 | $ 2031.40 |
| 1,000+ | $ 3.9947 | $ 3994.70 |
Standard Packaging1/Full Bag | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Circuit Protection/Transient Voltage Suppressors (TVS)/TVS Diodes | |
| Manufacturer | NTE Electronics | |
| Packaging | - | |
| Clamping Voltage | 103V | |
| Operating Temperature | -55℃~+175℃ | |
| Peak Pulse Current (Ipp) | 49A@10/1000us | |
| Peak Pulse Power Dissipation (Ppp) | 5kW@10/1000us | |
| Voltage - Breakdown | 71.1V | |
| type | TVS | |
| Polarity | Unidirectional | |
| Reverse Leakage Current (Ir) | 10uA | |
| Reverse Stand-Off Voltage (Vrwm) | 64V |
| Type | Description | |
|---|---|---|
| Category | Circuit Protection/Transient Voltage Suppressors (TVS)/TVS Diodes | |
| Manufacturer | NTE Electronics | |
| Packaging | - | |
| Clamping Voltage | 103V | |
| Operating Temperature | -55℃~+175℃ | |
| Peak Pulse Current (Ipp) | 49A@10/1000us |
| Type | Description | |
|---|---|---|
| Peak Pulse Power Dissipation (Ppp) | 5kW@10/1000us | |
| Voltage - Breakdown | 71.1V | |
| type | TVS | |
| Polarity | Unidirectional | |
| Reverse Leakage Current (Ir) | 10uA | |
| Reverse Stand-Off Voltage (Vrwm) | 64V |
Introduction
The NTE4800 Series of high power transient suppressors are Silicon PN Junction devices designed for absorbtion of high voltage transients associated with power disturbances, switching and induced lighting effects. These devices were designed to be used on the output of switching power supplies and may be used to replace crowbar circuits. They are able to withstand high levels of peak current while allowing a circuit breaker to trip of a fuse to blow before shorting. This will enable the user to reset the breaker or replace the fuse and continue operation. For this type of operation, it is recommended that a sufficient mounting surface be used for dissipating the heat generated by the device during the transient or overvoltage condition.
Features
- Glass Passivated Junction
- 5000W Peak Pulse Power Capability on 10/1000μs Waveform
- Repetition Rate (Duty Cycle): 0.05%
- Low Incremental Surge Resistance
- Fast Response Time
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8541100000 |
| USHTS | 8541100040 |
| TARIC | 8541100000 |
| CAHTS | 8541100090 |
| BRHTS | 85411011 |
| INHTS | 85411000 |
| MXHTS | 8541.10.01 |
| Type | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8541100000 |
| USHTS | 8541100040 |
| TARIC | 8541100000 |
| Type | Details |
|---|---|
| CAHTS | 8541100090 |
| BRHTS | 85411011 |
| INHTS | 85411000 |
| MXHTS | 8541.10.01 |