LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
ADI AD8295BCPZ-R7 product image
Images for reference only

ADI AD8295BCPZ-R7

Manufacturer
ADI
MPN
AD8295BCPZ-R7
LCSC Part #
C652667
Packaging
LFCSP-16(3.8x4)
Customer #
Key Attributes
2.5mA 18mA 1 120uV 2V/us 90dB 500pA Rail-to-rail output LFCSP-16(3.8x4) Instrumentation, Op Amps, Buffer Amps RoHS
Datasheetpdf iconADI AD8295BCPZ-R7
RoHS Compliance1 documents available
Out of Stock
Notify Me
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 8.5354$ 8.54
200+$ 3.3031$ 660.62
500+$ 3.1873$ 1593.65
1,500+$ 3.1302$ 4695.30
Standard Packaging1500/Full Reel
Better price for more quantity?
$

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
ManufacturerADI
PackagingLFCSP-16(3.8x4)
Quiescent Current2.5mA
Output Current18mA
Number of Channels1
FeaturesExternal resistor gain
Vos - Input Offset Voltage120uV
Slew Rate2V/us
Operating Temperature-40℃~+85℃
Common Mode Rejection Ratio(CMRR)90dB
Ib - Input Bias Current500pA
Rail to RailRail-to-rail output
Input Offset Voltage Drift(Vos TC)400nV/℃
-3dB Bandwidth1MHz
Report an ErrorShow similar products (0) >

Introduction

AI Translation

The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4mm×4mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20kΩ resistors. The AD8295 is designed to make PCB routing easy and efficient. The AD8295 components are arranged in a logical way so that typical application circuits have short routes and few vias. Unlike most chip scale packages, the AD8295 does not have an exposed metal pad on the back of the part, which frees additional space for routing and vias. The logical pin arrangement and routing freedom enable the AD8295 to offer simple pin-strapped solutions for complex systems in the equivalent board space of a typical MSOP package. The AD8295 includes a high performance, programmable gain instrumentation amplifier. Gain is set from 1 to 1000 with a single resistor. The low noise and excellent common-mode rejection of the AD8295 enable the part to easily detect small signals even in the presence of large common-mode interference. The AD8295 operates on both single and dual supplies and is well suited for applications where ±10V input voltages are encountered. Performance is specified over the entire industrial temperature range of - 40°C to +85°C for all grades. The AD8295 is operational from - 40°C to +125°C.

Features

AI Translation
  • Saves board space
  • Includes precision in-amp, 2 op amps, and 2 matched resistors
  • 4 mm × 4 mm LFCSP
  • No heat slug for more routing room
  • Differential output fully specified
  • Gain set with 1 external resistor (gain range: 1 to 1000)
  • Input voltage noise: 8 mV/√Hz maximum at 1 kHz
  • CMRR (G = 1): 90 dB minimum
  • Input bias current: 0.8 nA maximum
    • 3 dB bandwidth (G = 1): 1.2 MHz
  • Slew rate: 2 V/μs
  • Wide power supply range: ±2.3 V to ±18 V
  • 1 ppm/°C, 0.03% resistor matching

Applications

AI Translation
  • Industrial process controls
  • Wheatstone bridges
  • Precision data acquisition systems
  • Medical instrumentation
  • Strain gages
  • Transducer interfaces
  • Differential output