LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD

MICROCHIP LAN9311-NZW

Hersteller
Herst.-Teilenr.
LAN9311-NZW
LCSC-Nr.
C638316
Verp.
XVTQFP-128(14x14)
Kundennummer
Hauptmerkm.
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
DatenblattMICROCHIP LAN9311-NZW
RoHS-Konformität2 Dokumente verfügbar
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Interface/Controllers
HerstellerMICROCHIP
Verp.XVTQFP-128(14x14)
FeaturesIEEE1588 timestamp;Programmable LED indication
MAC Interface-
Voltage - Supply3.3V
Operating Temperature0℃~+70℃
Type-
Number of Channels2
Ethernet Speed Standards10BASE-T;100BASE-TX
Data Rate10Mbit/s;100Mbit/s

Beschreibung

KI-Übersetzung

The LAN9311/LAN9311i is a full featured, 2 port 10/100 managed Ethernet switch designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9311/LAN9311i combines all the functions of a 10/100 switch system, including the switch fabric, packet buffers, buffer manager, media access controllers (MACs), PHY transceivers, and host bus interface.

Merkmale

KI-Übersetzung
  • High performance and full featured 2 port switch with VLAN, QoS packet prioritization, Rate Limiting, IGMP monitoring and management functions
  • Easily interfaces to most 16-bit embedded CPU’s
  • Unique Virtual PHY feature simplifies software development by mimicking the multiple switch ports as a single port MAC/PHY
  • Integrated IEEE 1588 Hardware Time Stamp Unit
  • 4 dynamic QoS queues per port
  • Input priority determined by VLAN tag, DA lookup, TOS, DIFFSERV or port default value
  • Programmable class of service map based on input priority
  • Remapping of 802.1Q priority field on per port basis
  • Programmable rate limiting at the ingress/egress ports with random early discard, per port / priority
  • Port mirroring/monitoring/sniffing: ingress and/or egress traffic on any ports or port pairs
  • Fully compliant statistics (MIB) gathering counters
  • Control registers configurable on-the-fly
  • 2 internal 10/100 PHYs with HP Auto-MDIX support
  • Fully compliant with IEEE 802.3 standards
  • 10BASE-T and 100BASE-TX support
  • Full and half duplex support
  • Full duplex flow control
  • Backpressure (forced collision) half duplex flow control
  • Automatic flow control based on programmable levels
  • Automatic 32-bit CRC generation and checking
  • Automatic payload padding
  • 2K Jumbo packet support
  • Programmable interframe gap, flow control pause value
  • Full transmit/receive statistics
  • Auto-negotiation
  • Automatic MDI/MDI-X
  • Loop-back mode
  • High-performance host bus interface
  • Provides in-band network communication path
  • Access to management registers
  • Simple, SRAM-like interface
  • 16-bit data bus
  • Big, little, and mixed endian support
  • Large TX and RX FIFO’s for high latency applications
  • Programmable water marks and threshold levels
  • Host interrupt support
  • IEEE 1588 Hardware Time Stamp Unit
  • Global 64-bit tunable clock
  • Master or slave mode per port
  • Time stamp on TX or RX of Sync and Delay_req packets per port
  • Timestamp on GPIO
  • 64-bit timer comparator event generation (GPIO or IRQ)
  • Comprehensive Power Management Feature
  • Wake on LAN
  • Wake on link status change (energy detect)
  • Magic packet wakeup
  • Wakeup indicator event signal
  • General Purpose Timer
  • Serial EEPROM interface (I²C master or Microwire master) for non-managed configuration
  • Programmable GPIOs/LEDs

Anwendungen

KI-Übersetzung
  • Cable, satellite, and IP set-top boxes
  • Digital televisions
  • Digital video recorders
  • VoIP/Video phone systems
  • Home gateways
  • Test/Measurement equipment
  • Industrial automation systems