- Pinout
- Footprint
MICROCHIP LAN8700IC-AEZG-TR
| Manufacturer | |
| MPN | LAN8700IC-AEZG-TR |
| LCSC Part # | C625085 |
| Packaging | QFN-36-EP(6x6) |
| Customer # | |
| Key Attributes | ESD Protected MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support and flexPWR Technology |
| Datasheet |  MICROCHIP LAN8700IC-AEZG-TR |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MICROCHIP | |
| Packaging | QFN-36-EP(6x6) | |
| Voltage - Supply | 1.6V~3.6V | |
| Type | PHY Transceiver | |
| Ethernet Speed Standards | 10BASE-T;100BASE-TX | |
| Data Rate | 10Mbit/s;100Mbit/s | |
| number of channels | - | |
| Operating Temperature | 0℃~+70℃ | |
| Features | Error detection and recovery;Programmable LED indication;Low-power mode | |
| Interface | MII;RMII |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 3000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The Microchip LAN8700/LAN8700i is a low-power, industrial-temperature (LAN8700i), analog interface IC with variable I/O voltage. It supports HP Auto-MDIX and is suitable for high-performance embedded Ethernet applications. The LAN8700/LAN8700i can be configured to operate on a single 3.3V power supply using an integrated 3.3V to 1.8V linear regulator. Alternatively, the linear regulator can be disabled to optimize system designs with a 1.8V power plane.
The LAN8700/LAN8700i includes an encoder/decoder, a scrambler/descrambler, a waveform-shaping transmitter, an output driver, a twisted-pair receiver with adaptive equalizer and baseline wander (BLW) correction, as well as clock and data recovery functions. The LAN8700/LAN8700i can be configured to support the Media Independent Interface (MII) or the Reduced Media Independent Interface (RMII).
The LAN8700/LAN8700i complies with the IEEE 802.3-2005 standard (MII pins are tolerant of 3.6V) and supports IEEE 802.3-2005-compatible and vendor-specific register functions. It includes a full-duplex 10-BASE-T/100BASE-TX transceiver and supports 10 Mbps (10BASE-T) operation over Category 3 and Category 5 unshielded twisted-pair cables, as well as 100 Mbps (100BASE-TX) operation over Category 5 unshielded twisted-pair cables.
Features
- Single-chip Ethernet PHY transceiver
- ESD protection ±8kV HBM, no external protection devices required
- ESD protection per EN/IEC61000-4-2: ±8kV contact discharge, ±15kV air discharge, per independent test lab
- Comprehensive flexPWR technology — flexible power management architecture
- LVCMOS variable I/O voltage range: +1.6V to +3.6V
- Integrated 3.3V to 1.8V regulator for optional single-supply operation; regulator can be disabled if system provides 1.8V supply
- HP Auto-MDIX per IEEE 802.3ab specification
- Cable length greater than 150 meters
- Automatic polarity correction
- Latch-up performance exceeds 150mA per EIA/JESD 78, Class II
- Energy detect power-down mode
- Low-current power-down mode
- Low operating current consumption: — typical 39mA in 10BASE-T mode, — typical 79mA in 100BASE-TX mode
- Auto-negotiation and parallel detection support
- MII and RMII support
- IEEE 802.3-2005 compliant — MII pins 3.6V tolerant
- IEEE 802.3-2005 compliant register set
- Integrated DSP with adaptive equalizer
- Baseline wander (BLW) correction
- Vendor-specific register functions
- Low-profile 36-pin QFN RoHS-compliant package (6x6x0.9mm height)
- 4 LED status indicators
- Commercial operating temperature 0°C to 70°C
- Industrial operating temperature -40°C to 85°C version available (LAN8700i)
Applications
- Set-top boxes
- Network printers and servers
- LAN on motherboard
- 10/100 PCMCIA/CardBus applications
- Embedded telecom applications
- Video recording/playback systems
- Cable modem/router
- DSL modem/router
- Digital video recorders
- Personal video recorders
- IP phones and video phones
- Wireless access points
- Digital television
- Digital media adapters/servers
- POS terminals
- Automotive networking
- Gaming consoles
- Security systems
- POE applications
- Access control
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 3.1903 | $ 3.19 |
| 10+ | $ 2.7561 | $ 27.56 |
| 30+ | $ 2.4985 | $ 74.96 |
| 100+ | $ 2.236 | $ 223.60 |
| 500+ | $ 2.1161 | $ 1058.05 |
| 1,000+ | $ 2.0626 | $ 2062.60 |
Standard Packaging3000/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MICROCHIP | |
| Packaging | QFN-36-EP(6x6) | |
| Voltage - Supply | 1.6V~3.6V | |
| Type | PHY Transceiver | |
| Ethernet Speed Standards | 10BASE-T;100BASE-TX | |
| Data Rate | 10Mbit/s;100Mbit/s | |
| number of channels | - | |
| Operating Temperature | 0℃~+70℃ | |
| Features | Error detection and recovery;Programmable LED indication;Low-power mode | |
| Interface | MII;RMII |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 3000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The Microchip LAN8700/LAN8700i is a low-power, industrial-temperature (LAN8700i), analog interface IC with variable I/O voltage. It supports HP Auto-MDIX and is suitable for high-performance embedded Ethernet applications. The LAN8700/LAN8700i can be configured to operate on a single 3.3V power supply using an integrated 3.3V to 1.8V linear regulator. Alternatively, the linear regulator can be disabled to optimize system designs with a 1.8V power plane.
The LAN8700/LAN8700i includes an encoder/decoder, a scrambler/descrambler, a waveform-shaping transmitter, an output driver, a twisted-pair receiver with adaptive equalizer and baseline wander (BLW) correction, as well as clock and data recovery functions. The LAN8700/LAN8700i can be configured to support the Media Independent Interface (MII) or the Reduced Media Independent Interface (RMII).
The LAN8700/LAN8700i complies with the IEEE 802.3-2005 standard (MII pins are tolerant of 3.6V) and supports IEEE 802.3-2005-compatible and vendor-specific register functions. It includes a full-duplex 10-BASE-T/100BASE-TX transceiver and supports 10 Mbps (10BASE-T) operation over Category 3 and Category 5 unshielded twisted-pair cables, as well as 100 Mbps (100BASE-TX) operation over Category 5 unshielded twisted-pair cables.
Features
- Single-chip Ethernet PHY transceiver
- ESD protection ±8kV HBM, no external protection devices required
- ESD protection per EN/IEC61000-4-2: ±8kV contact discharge, ±15kV air discharge, per independent test lab
- Comprehensive flexPWR technology — flexible power management architecture
- LVCMOS variable I/O voltage range: +1.6V to +3.6V
- Integrated 3.3V to 1.8V regulator for optional single-supply operation; regulator can be disabled if system provides 1.8V supply
- HP Auto-MDIX per IEEE 802.3ab specification
- Cable length greater than 150 meters
- Automatic polarity correction
- Latch-up performance exceeds 150mA per EIA/JESD 78, Class II
- Energy detect power-down mode
- Low-current power-down mode
- Low operating current consumption: — typical 39mA in 10BASE-T mode, — typical 79mA in 100BASE-TX mode
- Auto-negotiation and parallel detection support
- MII and RMII support
- IEEE 802.3-2005 compliant — MII pins 3.6V tolerant
- IEEE 802.3-2005 compliant register set
- Integrated DSP with adaptive equalizer
- Baseline wander (BLW) correction
- Vendor-specific register functions
- Low-profile 36-pin QFN RoHS-compliant package (6x6x0.9mm height)
- 4 LED status indicators
- Commercial operating temperature 0°C to 70°C
- Industrial operating temperature -40°C to 85°C version available (LAN8700i)
Applications
- Set-top boxes
- Network printers and servers
- LAN on motherboard
- 10/100 PCMCIA/CardBus applications
- Embedded telecom applications
- Video recording/playback systems
- Cable modem/router
- DSL modem/router
- Digital video recorders
- Personal video recorders
- IP phones and video phones
- Wireless access points
- Digital television
- Digital media adapters/servers
- POS terminals
- Automotive networking
- Gaming consoles
- Security systems
- POE applications
- Access control
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 5A991B1 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | 5A991B1 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |