ADI AD549JHZ

The AD549 is a monolithic electrometer operational amplifier with very low input bias current. Input offset voltage and input offset voltage drift are laser trimmed for precision performance. The ultralow input current of the part is achieved with Topgate JFET technology, a process development exclusive to Analog Devices, Inc. This technology allows fabrication of extremely low input current JFETs compatible with a standard junction isolated bipolar process. The 10^15Ω common - mode impedance, which results from the bootstrapped input stage, ensures that the input current is essentially independent of the commonmode voltage. The AD549 is suited for applications requiring very low input current and low input offset voltage. It excels as a preamp for a wide variety of current output transducers, such as photodiodes, photomultiplier tubes, or oxygen sensors. The AD549 can also be used as a precision integrator or low droop sample - and - hold. The AD549 is pin compatible with standard FET and electrometer op amps, allowing designers to upgrade the performance of present systems at little additional cost. The AD549 is available in a TO - 99 hermetic package. The case is connected to Pin 8, thus, the metal case can be independently connected to a point at the same potential as the input terminals, minimizing stray leakage to the case. The AD549 is available in four performance grades.

• Ultralow input bias current
• 60 fA maximum (AD549L)
• 100 fA maximum (AD549K)
• 250 fA maximum (AD549J)
• Input bias current guaranteed over the common - mode voltage range
• Low offset voltage
• 0.50 mV maximum (AD549K)
• 1.00 mV maximum (AD549J)
• Low offset drift
• 15 μV/°C maximum (AD549K)
• 20 μV/°C maximum (AD549J)
• Low power
• 700 μA maximum supply current
• Low input voltage noise
• 4 μV (typ) p - p over 0.1 Hz to 10 Hz
• MIL - STD - 883B parts available

• Electrometer amplifier
• Photodiode preamp
• pH electrode buffer