AWINIC(Shanghai Awinic Tech) AW99703CSR

A highly accurate, highly matching three-string LCD backlighting power solution. It is a highly integrated step-up DC-DC converter operating with a wide input voltage from 2.7V to 5.5V and a temperature range from -40°C to 85°C, accommodating 1-cell lithium ion battery or 5V supply. It integrates a high voltage MOSFET, and three high accuracy, high voltage current sinks. Each current sink can be regulated up to 29.6mA in backlight mode. In flash mode, flash current sink can be regulated up to 79.9mA, and flash timeout can be regulated up to 1.5sec. The LED current is adjusted via an |2complement interface or through a logic level PWM input. The PWM duty cycle is internally sensed and mapped to an 11-bit linear current. Thorough protection features include LED fault (open and short) protection, cycle-by-cycle current limit protection, output over-voltage protection and thermal shutdown. It is an inductive boost converter for WLED backlight display. It has three high-voltage LED strings with high current accuracy and string-to-string matching. It supports 11 bits resolution analog dimming via |2complement register set or via PWM duty changed. It also supports flash mode by enhancing sink current up to 79.9mA string with the flash timeout protection.

• ± 1% current matching across voltage, temperature, and process
• ± 3% current accuracy across voltage, temperature, and process
• High efficiency, up to 91%
• Up to 29.6mA string in backlight mode and up to 79.9mA string in flash mode
• I2C/PWM dual dimming control mode
• 11-bit |2complement exponential or linear mapping with programmable transition ramp time
• Programmable current sink turn on/off ramp time
• Selectable boost converter switching frequency 1MHz or 500kHz with shift up and down option
• Programmable slew rate control minimize switching noise and improve EMI performance
• Five configurable OVP thresholds (17.5V, 24V, 31V, 38V, 41.5V)
• Four configurable current limit thresholds (900mA, 1800mA, 2700mA, 3400mA)
• Programmable flash current and timeout
• LED open/short protection
• WLCSP 1.64mm x 1.24mm - 12B
• 7-bit slave address (A7~A1) is 0110110 binary(0x36H)

• Mobile phones and Tablet Backlighting