IDCHIP LM4890
| Manufacturer | IDCHIPAsian Brands |
| MPN | LM4890 |
| LCSC Part # | C51018346 |
| Packaging | SOP-8 |
| Customer # | |
| Key Attributes | 2.6mA 1Wx1@8Ω Class AB SOP-8 Audio Amplifiers RoHS |
| Datasheet |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers | |
| Manufacturer | IDCHIP | |
| Packaging | SOP-8 | |
| Quiescent Current | 2.6mA | |
| Total Harmonic Distortion + Noise (THD+N) | 1% | |
| Features | Enable/shutdown function;Automatic mute/no-noise switch | |
| Voltage - Supply | 2V~5.5V | |
| Operating Temperature | -40℃~+85℃ | |
| Output Power | 1Wx1@8Ω | |
| Class | Class AB | |
| Power Supply Rejection Ratio (PSRR) | 85dB |
Additional Information
| Type | Details |
|---|---|
| Minimum | 10 |
| Multiple | 10 |
| Standard Packaging | 4000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The LM4890 is a Class AB audio power amplifier designed for demanding mobile phones and other portable communication devices. At a 5V supply voltage with a 1kHz input, it delivers a maximum output power of 1W into an 8Ω load, with total harmonic distortion plus noise less than 1% across the 20Hz to 20kHz audio band. The device features a simple application circuit requiring minimal external components to deliver high-quality output power. The LM4890's output requires no external coupling or bootstrap capacitors, making it ideal for low-voltage, low-power applications. It supports a shutdown mode for reduced power consumption and employs a switching suppression technique that effectively eliminates power-on and power-off noise. The LM4890 is unity-gain stable, and the amplifier's voltage gain can be adjusted by configuring external resistors for ease of use. The gain is given by: AvD = 2 × (Rf / Ri). The bridge output topology delivers four times the output power compared to single-ended mode under the same conditions. The maximum power dissipation is given by PDMAX = 4 × (VDD)² / (2π² RL), which must not exceed the package thermal limit calculated by PDMAX = (TJMAX - TA) / θJA, where θJA = 190 °C/W and TJMAX = 150 °C for the LM4890 surface-mount package. Proper power supply bypassing is critical for low-noise performance and supply filtering; 10μF and 0.1μF bypass capacitors should be placed as close as possible to the device's supply pins. The LM4890 features a shutdown mode and power-down capability for further power reduction, with a typical quiescent current of 0.1μA in shutdown. The SHUTDOWN pin must be properly driven by an external signal and must not be left floating.
Features
- High output power: 1W into 8Ω load at 1kHz (THD+N < 10%)
- Excellent pop-and-click suppression for power-on and power-off noise
- No bootstrap capacitor required
- Unity-gain stable
- Low shutdown leakage current, typically 0.1μA
- Wide supply voltage range: 2.2V ~ 5.5V
- Externally adjustable gain
- Available in SOP-8/MSOP-8 packages
Applications
- Mobile phones
- PDAs and tablets
- Portable devices
- Smart voice modules
- Smart learning pens
| Qty | Unit Price | Total Amount |
|---|---|---|
| 10+ | $ 0.065 | $ 0.65 |
| 100+ | $ 0.0516 | $ 5.16 |
| 300+ | $ 0.045 | $ 13.50 |
| 1,000+ | $ 0.04 | $ 40.00 |
| 4,000+ | $ 0.0359 | $ 143.60 |
| 8,000+ | $ 0.0339 | $ 271.20 |
Standard Packaging4000/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers | |
| Manufacturer | IDCHIP | |
| Packaging | SOP-8 | |
| Quiescent Current | 2.6mA | |
| Total Harmonic Distortion + Noise (THD+N) | 1% | |
| Features | Enable/shutdown function;Automatic mute/no-noise switch | |
| Voltage - Supply | 2V~5.5V | |
| Operating Temperature | -40℃~+85℃ | |
| Output Power | 1Wx1@8Ω | |
| Class | Class AB | |
| Power Supply Rejection Ratio (PSRR) | 85dB |
Additional Information
| Type | Details |
|---|---|
| Minimum | 10 |
| Multiple | 10 |
| Standard Packaging | 4000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The LM4890 is a Class AB audio power amplifier designed for demanding mobile phones and other portable communication devices. At a 5V supply voltage with a 1kHz input, it delivers a maximum output power of 1W into an 8Ω load, with total harmonic distortion plus noise less than 1% across the 20Hz to 20kHz audio band. The device features a simple application circuit requiring minimal external components to deliver high-quality output power. The LM4890's output requires no external coupling or bootstrap capacitors, making it ideal for low-voltage, low-power applications. It supports a shutdown mode for reduced power consumption and employs a switching suppression technique that effectively eliminates power-on and power-off noise. The LM4890 is unity-gain stable, and the amplifier's voltage gain can be adjusted by configuring external resistors for ease of use. The gain is given by: AvD = 2 × (Rf / Ri). The bridge output topology delivers four times the output power compared to single-ended mode under the same conditions. The maximum power dissipation is given by PDMAX = 4 × (VDD)² / (2π² RL), which must not exceed the package thermal limit calculated by PDMAX = (TJMAX - TA) / θJA, where θJA = 190 °C/W and TJMAX = 150 °C for the LM4890 surface-mount package. Proper power supply bypassing is critical for low-noise performance and supply filtering; 10μF and 0.1μF bypass capacitors should be placed as close as possible to the device's supply pins. The LM4890 features a shutdown mode and power-down capability for further power reduction, with a typical quiescent current of 0.1μA in shutdown. The SHUTDOWN pin must be properly driven by an external signal and must not be left floating.
Features
- High output power: 1W into 8Ω load at 1kHz (THD+N < 10%)
- Excellent pop-and-click suppression for power-on and power-off noise
- No bootstrap capacitor required
- Unity-gain stable
- Low shutdown leakage current, typically 0.1μA
- Wide supply voltage range: 2.2V ~ 5.5V
- Externally adjustable gain
- Available in SOP-8/MSOP-8 packages
Applications
- Mobile phones
- PDAs and tablets
- Portable devices
- Smart voice modules
- Smart learning pens
C51018346 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | - |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |



