FUDAN MICRO FM25Q16A-DN-T-G

The FM25Q16A is a 16M-bit (2M-byte) Serial Flash memory, with advanced write protection mechanisms. The FM25Q16A supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O as well as 2-clock instruction cycle Quad Peripheral Interface (QPI). They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The FM25Q16A can be programmed 1 to 256 bytes at a time, using the Page Program instruction. It is designed to allow either single Sector/Block at a time or full chip erase operation. The FM25Q16A can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block.

• 16Mbit of Flash memory
• 512 uniform sectors with 4K-byte each
• 32 uniform blocks with 64K-byte each or
• 64 uniform blocks with 32K-byte each
• 256 bytes per programmable page
• Wide Operation Range: 2.5V~3.6V single voltage supply, Industrial temperature range
• Serial Interface: Standard SPI: CLK, CS#, DI, DO, WP#; Dual SPI: CLK, CS#, DQ₀, DQ₁, WP#; Quad SPI: CLK, CS#, DQ₀, DQ₁, DQ₂, DQ₃; QPI: CLK, CS#, DQ₀, DQ₁, DQ₂, DQ₃; Continuous READ mode support; Program/Erase Suspend and Resume support; Allow true XIP (execute in place) operation
• High Performance: Max FAST_READ clock frequency: 100MHz; Max READ clock frequency: 66MHz; Typical page program time: 0.6ms; Typical sector erase time: 70ms; Typical block erase time: 300ms; Typical chip erase time: 7s
• Security: Software and hardware write protection; Lockable 4X256-Byte OTP security Pages; 64-Bit Unique ID for each device; Discoverable parameters(SFDP) register
• High Reliability: Endurance: 100,000 program/erase cycles; Data retention: 20 years
• Green Package: 8-pin SOP (150mil); 8-pin SOP (208mil); 8-pad TDFN (2x3mm); 8-pad USON (4x3mm); All Packages are RoHS Compliant and Halogenfree