LCSC Electronics logoLCSC Electronics svg logo
로그인
USD
TI HPA02196RGRR product image
실제 제품과 다를 수 있음

TI HPA02196RGRR

제조업체
제조사 품번
HPA02196RGRR
LCSC 번호
C3681614
포장
VQFN-20
고객 번호
주요 제원
SMBus Lithium Battery 8.128A VQFN-20 Battery Management RoHS
데이터시트TI HPA02196RGRR
RoHS 준수1개 문서 이용 가능
품절
재입고 알림
최소값: 1배수: 1판매 단위: Piece
BOM 목록에 추가
수량단가(참고용)총액
1+$ 3.2131$ 3.21
200+$ 1.2433$ 248.66
500+$ 1.2001$ 600.05
1,000+$ 1.1785$ 1178.50
표준 패키지3000/Full Reel
수량이 많을수록 더 좋은 가격?
$

제품 사양

전체
타입설명
카테고리Integrated Circuits (ICs)/Power Management (PMIC)/Battery Management
제조업체TI
포장VQFN-20
Operating Temperature0℃~+125℃
InterfaceSMBus
Quiescent Current650uA
0V Battery Charge-
Operating Voltage4.5V~24V
Type of BatteryLithium Battery
FeaturesProgrammable charging current;Under-voltage lockout;Overcurrent Protection;Overvoltage protection;Short-Circuit Protection;Soft-start
The Chip TypeCharging IC
Charge Current - Max8.128A
Balance Current-
도움말 및 피드백유사 제품 보기 (0) >

개요

AI 번역

The bq24735 is a high-efficiency synchronous battery charger that offers a low component count for battery charging applications with space constraints and various battery chemistries. When the system's power supply demand temporarily exceeds the adapter's maximum power supply level, the bq24735 uses intelligent boost technology to allow the battery to release energy into the system, thus protecting the adapter from damage. To meet the need for automatic system power selection, the bq24735 uses two charge pumps to drive n-channel MOSFETs (ACFET, RBFET, and BATFET) respectively. The SMBus-controlled input current, charging current, and charging voltage DACs allow for very high regulation accuracy, which can be easily programmed via the system power management microcontroller. The bq24735 uses an internal input current register or an external ILIM pin to slow down the PWM modulation speed and reduce the charging current. The bq24735 charges 1-, 2-, 3-, or 4-series Li+ batteries and comes in a 20-pin, 3.5×3.5 mm² QFN package.

주요 특징

AI 번역
  • Adapter and battery jointly power the system to support Intel CPU Intelligent Turbo mode
  • Automatic N-channel MOSFET selection for system power from adapter or battery driven by internal charge pump
  • Programmable input current, charge voltage, charge current limit ±0.5% charge voltage accuracy up to 19.2V, ±3% charge current accuracy up to 8.128A, ±3% input current accuracy up to 8.064A, ±2% 20x adapter current or charge current amplifier output accuracy
  • Programmable battery depletion threshold and battery learning function
  • Programmable adapter detection and indicator
  • Integrated soft-start
  • Integrated loop compensation
  • Real-time system control on ILIM pin to limit discharge current
  • AC adapter operating range 4.5V to 24V
  • 5μA shutdown battery discharge current
  • 0.65mA (max 0.8mA) adapter standby quiescent current
  • 20-pin 3.5×3.5 mm² QFN package

응용 분야

AI 번역
  • Portable notebooks, UMPCs, ultra-thin laptops, and notebook computers
  • Handheld terminal devices
  • Industrial and medical equipment
  • Portable devices