WCH CH348Q
| Manufacturer | WCHAsian Brands |
| MPN | CH348Q |
| LCSC Part # | C2979161 |
| Packaging | LQFP-48(7x7) |
| Customer # | |
| Key Attributes | USB to 8 Serial Port Chip CH348 |
| Datasheet |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Interface Controllers | |
| Manufacturer | WCH | |
| Packaging | LQFP-48(7x7) | |
| Features | Programmable baud rate;FIFO buffer;Hardware flow control support;Power-on reset;Built-in clock generator | |
| Operating Temperature | - | |
| Voltage - Supply | 3.3V | |
| Applications Function | USB to UART | |
| Data Rate | 6Mbps | |
| USB Protocol | USB 2.0 | |
| Supply Current | 55mA | |
| Number of Channels | 8 | |
| Quiescent Supply Current | 360uA |
Report an ErrorShow similar products (0) >
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 250 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
AI Translation
CH348 is a high-speed USB bus converter chip that implements USB to eight asynchronous serial ports UART0/1/2/3/4/5/6/7, used to expand asynchronous serial ports for computers, or to directly upgrade ordinary serial port devices or MCUs to USB bus.
Features
AI Translation
- 480Mbps high-speed USB device interface; only crystal and capacitors required as external components.
- Built-in firmware emulating standard serial ports, enabling upgrade of existing serial peripherals or addition of extra serial ports via USB.
- Fully compatible with serial port applications under Windows OS on the host side; no modifications required.
- Hardware full-duplex serial port with independent built-in TX/RX buffers; communication baud rate supports 1200bps ~ 6Mbps.
- Serial port supports 8 data bits, odd/even/no parity, and 1 or 2 stop bits.
- Each serial port features a built-in 2048-byte RX FIFO and 1024-byte TX FIFO.
- Supports common MODEM control signals: RTS, DTR, DCD, RI, DSR, CTS.
- Supports CTS and RTS hardware automatic flow control.
- Half-duplex support with TNOW signal indicating serial transmission status, usable for RS485 TX/RX switching control.
- Supports up to 48 GPIO input/output lines.
- Supports RS232, RS485, RS422, and other interfaces via external level-shifting devices.
- CH348L serial port I/O independently powered; supports 3.3V, 2.5V, and 1.8V supply voltages.
- Built-in EEPROM for configuring VID, PID, maximum current, manufacturer and product information strings, and other parameters.
- Single 3.3V power supply.
- Available in LQFP48 and LQFP100 lead-free packages, RoHS compliant.
Applications
AI Translation
- USB to 8-Channel TTL Serial
In-Stock: 3,387
3,387 In stock, ships now
Add to BOM List
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 6.0344 | $ 6.03 |
| 10+ | $ 5.2517 | $ 52.52 |
| 30+ | $ 4.4966 | $ 134.90 |
| 250+ | $ 4.0256 | $ 1006.40 |
| 500+ | $ 3.8097 | $ 1904.85 |
| 1,000+ | $ 3.7106 | $ 3710.60 |
Standard Packaging250/Full Tray | ||
Better price for more quantity?
$
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Interface Controllers | |
| Manufacturer | WCH | |
| Packaging | LQFP-48(7x7) | |
| Features | Programmable baud rate;FIFO buffer;Hardware flow control support;Power-on reset;Built-in clock generator | |
| Operating Temperature | - | |
| Voltage - Supply | 3.3V | |
| Applications Function | USB to UART | |
| Data Rate | 6Mbps | |
| USB Protocol | USB 2.0 | |
| Supply Current | 55mA | |
| Number of Channels | 8 | |
| Quiescent Supply Current | 360uA |
Report an ErrorShow similar products (0) >
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 250 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
AI Translation
CH348 is a high-speed USB bus converter chip that implements USB to eight asynchronous serial ports UART0/1/2/3/4/5/6/7, used to expand asynchronous serial ports for computers, or to directly upgrade ordinary serial port devices or MCUs to USB bus.
Features
AI Translation
- 480Mbps high-speed USB device interface; only crystal and capacitors required as external components.
- Built-in firmware emulating standard serial ports, enabling upgrade of existing serial peripherals or addition of extra serial ports via USB.
- Fully compatible with serial port applications under Windows OS on the host side; no modifications required.
- Hardware full-duplex serial port with independent built-in TX/RX buffers; communication baud rate supports 1200bps ~ 6Mbps.
- Serial port supports 8 data bits, odd/even/no parity, and 1 or 2 stop bits.
- Each serial port features a built-in 2048-byte RX FIFO and 1024-byte TX FIFO.
- Supports common MODEM control signals: RTS, DTR, DCD, RI, DSR, CTS.
- Supports CTS and RTS hardware automatic flow control.
- Half-duplex support with TNOW signal indicating serial transmission status, usable for RS485 TX/RX switching control.
- Supports up to 48 GPIO input/output lines.
- Supports RS232, RS485, RS422, and other interfaces via external level-shifting devices.
- CH348L serial port I/O independently powered; supports 3.3V, 2.5V, and 1.8V supply voltages.
- Built-in EEPROM for configuring VID, PID, maximum current, manufacturer and product information strings, and other parameters.
- Single 3.3V power supply.
- Available in LQFP48 and LQFP100 lead-free packages, RoHS compliant.
Applications
AI Translation
- USB to 8-Channel TTL Serial
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



