LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
Cart
TI TPS63061DSCR product image
  • TPS63061DSCR thumbnail 1
  • TPS63061DSCR thumbnail 2
  • TPS63061DSCR thumbnail 3
  • Pinout
  • Footprint
Images for reference only

TI TPS63061DSCRRoHS

Manufacturer
TI
MPN
TPS63061DSCR
LCSC Part #
C2876326
Packaging
WSON-10-EP(3x3)
Customer #
Key Attributes
2A High Input Voltage Buck-Boost Converter
Datasheetpdf iconTI TPS63061DSCR
In-Stock: 3,075
3,075 In stock, ships now
Add to BOM List
QtyUnit PriceTotal Amount
1+$ 1.1693$ 1.17
10+$ 0.9674$ 9.67
30+$ 0.8583$ 25.75
100+$ 0.7329$ 73.29
500+$ 0.6775$ 338.75
1,000+$ 0.6531$ 653.10
Standard Packaging3000/Full Reel
Better price for more quantity?
$

Products Specifications

Show similar products (0) >
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
ManufacturerTI
PackagingWSON-10-EP(3x3)
Operating Temperature-40℃~+125℃@(TJ)
Frequency - Switching2.4MHz
FunctionBuck-Boost
Number of Outputs1
FeaturesLight load efficient mode;Frequency synchronization;Operating status indication;Load disconnect;Overcurrent Protection
Output TypeFixed
TopologyBuck-Boost
Operating Voltage2.5V~12V
Switch tube (built-in/external)Built-in
Output Voltage5V
Output Current1A
Quiescent Current30uA
Report an ErrorShow similar products (0) >

Additional Information

TypeDetails
Minimum1
Multiple1
Standard Packaging3000
Sales UnitPiece

Introduction

AI Translation

The TPS6306x devices provide a power supply solution for products powered by 3 to 6 alkaline, NiCd, or NiMH cells, or a single lithium-ion or lithium-polymer battery. When using a dual lithium-ion or lithium-polymer battery, the output current can be increased up to 2A while discharging the battery voltage down to 5V or lower. This buck-boost converter is based on a fixed-frequency, PWM controller using synchronous rectification for maximum efficiency. At low load currents, the converter enters power save mode to maintain high efficiency across a wide load current range. Power save mode can be disabled to force the converter to operate at a fixed switching frequency. The maximum average current through the switches is limited to 2.5A (typical). The output voltage can be programmed using an external resistor divider or internally fixed on-chip. The converter can be disabled to significantly reduce battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 10-pin small outline no-lead (SON) PowerPAD package, 3mm × 3mm (DSC).

Features

AI Translation
  • Up to 93% efficiency
  • 2A/1A output current in 5V buck mode
  • 1.3A output current in 5V boost mode (VIN > 4V)
  • Automatic transition between buck and boost modes
  • Typical quiescent current less than 30μA
  • Input voltage range: 2.5V to 12V
  • 2.5V to 8V fixed and adjustable output voltage options
  • Power save mode for improved efficiency at low output power
  • 2.4MHz forced fixed operating frequency with synchronization capability
  • Power good output
  • Buck-boost interleaved control
  • Load disconnect during shutdown
  • Over-temperature protection
  • Overvoltage protection
  • 3mm x 3mm small outline no-lead (SON)-10 package

Applications

AI Translation
  • Dual Li-Ion battery applications
  • Digital cameras and camcorders
  • Notebook computers
  • Industrial metering equipment
  • Ultra-portable mobile PCs and mobile internet devices
  • Personal medical products
  • High-power LEDs