TI SN74CBT3345CPWR

A high-speed TTL-compatible FET bus switch with low ON-state resistance (rₒₙ), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports provides protection for undershoot up to -2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.

Organized as an 8-bit bus switch with two output-enable (OE, OE̅) inputs. When OE is high or OE̅ is low, the bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE is low and OE̅ is high, the bus switch is OFF and the high-impedance state exists between the A and B ports.

Fully specified for partial-power-down applications using Iₒff. The Iₒff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

• Undershoot Protection for Off-Isolation on A and B Ports Up To −2 V
• Bidirectional Data Flow, With Near-Zero Propagation Delay
• Low ON-State Resistance (rₒₙ) Characteristics (rₒₙ = 3 Ω Typical)
• Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cᵢₒ(ₒff) = 5.5 pF Typical)
• Data and Control Inputs Provide Undershoot Clamp Diodes
• Low Power Consumption (Icc = 3 μA Max)
• Vcc Operating Range From 4 V to 5.5 V
• Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
• Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Performance Tested Per JESD 22
  • 2000-V Human-Body Model (A114-B, Class II)
  • 1000-V Charged-Device Model (C101)
• Supports Both Digital and Analog Applications

• USB Interface
• Memory Interleaving
• Bus Isolation
• Low-Distortion Signal Gating