MICROCHIP 1N6372

This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6358 through 1N6364 are unidirectional and the 1N6366 through 1N6372 are bidirectional where they all provide a very low specified clamping factor for minimal clamping voltages (VC) above their respective breakdown voltages (VBR) as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.

• Unidirectional and bidirectional TVS series in axial package for thru-hole mounting.
• Suppresses transients up to 1500 watts @ 10/1000 μs.
• tclamping (0 volts to V(BR) min): Unidirectional – Less than 100 picoseconds. Bidirectional – Less than 5 nanoseconds.
• Working voltage (VWM) range 10 V to 45 V.
• Low clamping factor (ratio of actual VC/VBR): 1.33 @ full rated power and 1.20 @ 50% rated power.
• Hermetically sealed DO-13 metal package.
• Upscreening in reference to MIL-PRF-19500 is available.
• RoHS compliant versions available.

• Designed to protect bipolar and MOS microprocessor based systems
• Protection from switching transients and induced RF.
• Protection from ESD & EFT per IEC 61000-4-2 and IEC 61000-4-4.
• Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance: Class 1, 2 & 3: 1N6358 to 1N6372 Class 4: 1N6358 to 1N6362 and 1N6366 to 1N6370 Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance: Class 1 & 2: 1N6358 to 1N6372 Class 3: 1N6358 to 1N6362 and 1N6366 to 1N6370 Class 4: 1N6358 and 1N6366 Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance: Class 2: 1N6358 to 1N6361 and 1N6366 to 1N6369 Class 3: 1N6358 and 1N6366