- Pinout
- Footprint
ST E-TDA7396
| Manufacturer | |
| MPN | E-TDA7396 |
| LCSC Part # | C262887 |
| Packaging | Multiwatt-11 |
| Customer # | |
| Key Attributes | 100mA 1-Channel 65Wx1@2Ω Class AB Multiwatt-11 Audio Amplifiers RoHS |
| Datasheet |  ST E-TDA7396 |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers | |
| Manufacturer | ST | |
| Packaging | Multiwatt-11 | |
| Quiescent Current | 100mA | |
| Total Harmonic Distortion + Noise (THD+N) | 0.06% | |
| Number of Inputs | - | |
| Signal-to-Noise Ratio | - | |
| Features | Enable/shutdown function;Automatic mute/no-noise switch;ESD protection;Overvoltage protection | |
| Voltage - Supply | 8V~18V | |
| Speaker Channels | 1-Channel | |
| Efficiency | - | |
| Operating Temperature | -40℃~+150℃ | |
| Output Power | 65Wx1@2Ω | |
| Class | Class AB | |
| Power Supply Rejection Ratio (PSRR) | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 25 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The TDA7396 is a BRIDGE class AB audio power amplifier especially intended for car radio High Power applications. The 2Ω power capability together with the possibility to operate either in DIFFERENTIAL INPUT MODE or SINGLE ENDED INPUT MODE makes it suitable for boosters and high end car radio applications. The exclusive fully complementary output stage and the internally fixed gain configuration drop the external component count. The on board clipping detector allows easy implementation of gain compression systems. The diagnostics facility allows to detect any mistakes during car radio set assembly and wiring in the car.
Features
- HIGH POWER CAPABILITY:
- 65W/2Ω MAX
- 60W/2Ω EIAJ
- 45W/2Ω @ VS = 14.4V, f = 1KHz, d = 10%
- DIFFERENTIAL INPUTS (EITHER SINGLE ENDED OR DIFFERENTIAL INPUT SIGNALS ARE ACCEPTED)
- MINIMUM EXTERNAL COMPONENT COUNT:
- NO BOOTSTRAP CAPACITORS
- NO BOUCHEROT CELLS
- INTERNALLY FIXED GAIN (26dB)
- NO SVR CAPACITOR
- ST.-BY FUNCTION (CMOS COMPATIBLE)
- AUTOMATIC MUTE DURING TURN-ON/OFF
- AUTOMUTE AT MINIMUM SUPPLY VOLTAGE DETECTION
- SYNCHRONIZING PIN FOR SIMULTANEOUS TURN-ON IN MULTI-DEVICE APPLICATIONS
- NO AUDIBLE POP DURING MUTE AND ST BY OPERATIONS
- CLIPPING DETECTOR
- SHORT CIRCUIT ■ OPEN LOAD THERMAL SHUTDOWN
- PROTECTIONS:
- SHORT CIRCUIT (TO GND, TO VS, ACROSS THE LOAD) VERY INDUCTIVE LOADS
- CHIP OVER-TEMPERATURE
- LOAD DUMP
- OPEN GND ESD
Applications
- car radio
- boosters
- high end car radio
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 5.7257 | $ 5.73 |
| 10+ | $ 4.9233 | $ 49.23 |
| 30+ | $ 4.4351 | $ 133.05 |
| 100+ | $ 4.0266 | $ 402.66 |
Standard Packaging25/Full Tube | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers | |
| Manufacturer | ST | |
| Packaging | Multiwatt-11 | |
| Quiescent Current | 100mA | |
| Total Harmonic Distortion + Noise (THD+N) | 0.06% | |
| Number of Inputs | - | |
| Signal-to-Noise Ratio | - | |
| Features | Enable/shutdown function;Automatic mute/no-noise switch;ESD protection;Overvoltage protection | |
| Voltage - Supply | 8V~18V | |
| Speaker Channels | 1-Channel | |
| Efficiency | - | |
| Operating Temperature | -40℃~+150℃ | |
| Output Power | 65Wx1@2Ω | |
| Class | Class AB | |
| Power Supply Rejection Ratio (PSRR) | - |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 25 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The TDA7396 is a BRIDGE class AB audio power amplifier especially intended for car radio High Power applications. The 2Ω power capability together with the possibility to operate either in DIFFERENTIAL INPUT MODE or SINGLE ENDED INPUT MODE makes it suitable for boosters and high end car radio applications. The exclusive fully complementary output stage and the internally fixed gain configuration drop the external component count. The on board clipping detector allows easy implementation of gain compression systems. The diagnostics facility allows to detect any mistakes during car radio set assembly and wiring in the car.
Features
- HIGH POWER CAPABILITY:
- 65W/2Ω MAX
- 60W/2Ω EIAJ
- 45W/2Ω @ VS = 14.4V, f = 1KHz, d = 10%
- DIFFERENTIAL INPUTS (EITHER SINGLE ENDED OR DIFFERENTIAL INPUT SIGNALS ARE ACCEPTED)
- MINIMUM EXTERNAL COMPONENT COUNT:
- NO BOOTSTRAP CAPACITORS
- NO BOUCHEROT CELLS
- INTERNALLY FIXED GAIN (26dB)
- NO SVR CAPACITOR
- ST.-BY FUNCTION (CMOS COMPATIBLE)
- AUTOMATIC MUTE DURING TURN-ON/OFF
- AUTOMUTE AT MINIMUM SUPPLY VOLTAGE DETECTION
- SYNCHRONIZING PIN FOR SIMULTANEOUS TURN-ON IN MULTI-DEVICE APPLICATIONS
- NO AUDIBLE POP DURING MUTE AND ST BY OPERATIONS
- CLIPPING DETECTOR
- SHORT CIRCUIT ■ OPEN LOAD THERMAL SHUTDOWN
- PROTECTIONS:
- SHORT CIRCUIT (TO GND, TO VS, ACROSS THE LOAD) VERY INDUCTIVE LOADS
- CHIP OVER-TEMPERATURE
- LOAD DUMP
- OPEN GND ESD
Applications
- car radio
- boosters
- high end car radio
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |