Littelfuse P6KE33CA

The P6KE Series is designed specifcally to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

• 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles): 0.01%
• Glass passivated chip junction in DO - 15 Packag
• Fast response time: typically less than 1.0ps from 0 Volts to BV min
• Excellent clamping capability
• Typical failure mode is short from over - specifed voltage or current
• Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A
• IEC - 61000 - 4 - 2 ESD 30kV(Air), 30kV (Contact)
• EFT protection of data lines in accordance with IEC 61000 - 4 - 4
• Low incremental surge resistance
• Typical |R| less than 1μΔ when VBR min > 12V
• Compatible with high temperature refow soldering (260°C/40 s)
• VBR@TJ = VBR@25°C x (1 + αT x (T - 25)) (αT:Temperature Coeffcient, typical value is 0.1%)
• IL Recognized epoxy meeting fammability classifcation V - 0
• Matte tin lead–free plated
• Halogen free and RoHS compliant
• Pb - free E3 means 2nd level interconnect is Pb - free and the terminal finish material is tin(Sn) (IPC/JEDEC J - STD609A.01)

• TVS components are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.