- Pinout Diagram
- Footprint Diagram
ST STPM33TR
| Manufacturer | |
| MPN | STPM33TR |
| LCSC Part # | C222411 |
| Packaging | QFN-32-EP(5x5) |
| Customer # | |
| Key Attributes | STPM33TR Energy Metering Chip |
| Datasheet |  ST STPM33TR |
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Energy Metering | |
| Manufacturer | ST | |
| Packaging | QFN-32-EP(5x5) | |
| Clock Frequency | 16MHz | |
| Tolerance | 0.1%;0.5% | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage Reference Drift | 30ppm/℃ | |
| Voltage Reference Value | 1.18V | |
| Voltage - Supply | 2.95V~3.65V | |
| Dynamic Range | 5000:1 | |
| Function | Programmable gain;Pulse output;Built-in reference source;Built-in digital filter;Digital calibration and compensation | |
| Number of Channels | 4 | |
| Interface | SPI;UART | |
| Meter Type | Single-Phase Energy Metering IC | |
| Current - Supply | 5mA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 3000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The STPM3x is an ASSP family designed for high accuracy measurement of power and energies in power line systems using the Rogowski coil, current transformer or shunt current sensors. The STPM3x provides instantaneous voltage and current waveforms and calculates RMS values of voltage and currents, active, reactive and apparent power and energies. The STPM3x is a mixed signal IC family consisting of an analog and a digital section. The analog section consists of up to two programmable gain low-noise low-offset amplifiers and up to four 2nd order 24-bit sigmadelta ADCs, two bandgap voltage references with independent temperature compensation, a low drop voltage regulator and DC buffers. The digital section consists of digital filtering stage, a hardwired DSP, DFE to the input and a serial communication interface (UART or SPI). The STPM3x is fully configurable and allows a fast digital system calibration in a single point over the entire current dynamic range.
Features
- Active power accuracy: <0.1% error over 5000:1 dynamic range; <0.5% error over 10000:1 dynamic range. Exceeds 50 - 60 Hz EN 50470-x, IEC 62053-2x, ANSI 12.2x standard requirements for AC watt meters
- Reactive power accuracy: <0.1% error over 2000:1 dynamic range
- Dual mode apparent energy calculation
- Instantaneous and averaged power RMS and instantaneous voltage and current
- Under and overvoltage detection (sag and swell) and monitoring
- Overcurrent detection and monitoring
- UART and SPI serial interface with programmable CRC polynomial verification
- Programmable LED and interrupt outputs
- Four independent 24-bit 2nd order sigma-delta ADCs
- Two programmable gain chopper stabilized low-noise and low-offset amplifiers
- Bandwidth 3.6 kHz at -3 dB
- Vcc supply range 3.3V ± 10%
- Supply current Icc 4.3 mA (STPM32)
- Input clock frequency 16 MHz, Xtal or external source
- Twin precision voltage reference: 1.18 V with independent programmable TC, 30 ppm/°C typ.
- Internal low drop regulator at 3 V (typ.)
- QFN packages
- Operating temperature from -40 °C to +85 °C
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 2.6686 | $ 2.67 |
| 10+ | $ 2.2746 | $ 22.75 |
| 30+ | $ 2.0287 | $ 60.86 |
| 100+ | $ 1.7763 | $ 177.63 |
| 500+ | $ 1.6624 | $ 831.20 |
| 1,000+ | $ 1.6135 | $ 1613.50 |
Standard Packaging3000/Full Reel | ||
Products Specifications
Show similar products (0) >| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Energy Metering | |
| Manufacturer | ST | |
| Packaging | QFN-32-EP(5x5) | |
| Clock Frequency | 16MHz | |
| Tolerance | 0.1%;0.5% | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage Reference Drift | 30ppm/℃ | |
| Voltage Reference Value | 1.18V | |
| Voltage - Supply | 2.95V~3.65V | |
| Dynamic Range | 5000:1 | |
| Function | Programmable gain;Pulse output;Built-in reference source;Built-in digital filter;Digital calibration and compensation | |
| Number of Channels | 4 | |
| Interface | SPI;UART | |
| Meter Type | Single-Phase Energy Metering IC | |
| Current - Supply | 5mA |
Additional Information
| Type | Details |
|---|---|
| Minimum | 1 |
| Multiple | 1 |
| Standard Packaging | 3000 |
| Sales Unit | Piece |
| EDA Models | EasyEDA Model |
Introduction
The STPM3x is an ASSP family designed for high accuracy measurement of power and energies in power line systems using the Rogowski coil, current transformer or shunt current sensors. The STPM3x provides instantaneous voltage and current waveforms and calculates RMS values of voltage and currents, active, reactive and apparent power and energies. The STPM3x is a mixed signal IC family consisting of an analog and a digital section. The analog section consists of up to two programmable gain low-noise low-offset amplifiers and up to four 2nd order 24-bit sigmadelta ADCs, two bandgap voltage references with independent temperature compensation, a low drop voltage regulator and DC buffers. The digital section consists of digital filtering stage, a hardwired DSP, DFE to the input and a serial communication interface (UART or SPI). The STPM3x is fully configurable and allows a fast digital system calibration in a single point over the entire current dynamic range.
Features
- Active power accuracy: <0.1% error over 5000:1 dynamic range; <0.5% error over 10000:1 dynamic range. Exceeds 50 - 60 Hz EN 50470-x, IEC 62053-2x, ANSI 12.2x standard requirements for AC watt meters
- Reactive power accuracy: <0.1% error over 2000:1 dynamic range
- Dual mode apparent energy calculation
- Instantaneous and averaged power RMS and instantaneous voltage and current
- Under and overvoltage detection (sag and swell) and monitoring
- Overcurrent detection and monitoring
- UART and SPI serial interface with programmable CRC polynomial verification
- Programmable LED and interrupt outputs
- Four independent 24-bit 2nd order sigma-delta ADCs
- Two programmable gain chopper stabilized low-noise and low-offset amplifiers
- Bandwidth 3.6 kHz at -3 dB
- Vcc supply range 3.3V ± 10%
- Supply current Icc 4.3 mA (STPM32)
- Input clock frequency 16 MHz, Xtal or external source
- Twin precision voltage reference: 1.18 V with independent programmable TC, 30 ppm/°C typ.
- Internal low drop regulator at 3 V (typ.)
- QFN packages
- Operating temperature from -40 °C to +85 °C
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |