TI DRV5023BIQDBZRQ1

The DRV5023-Q1 device is a chopper-stabilized Hall-effect sensor that provides a magnetic field sensing solution with excellent sensitivity stability and integrated protection features over the entire temperature range. When the applied magnetic flux density exceeds the B_OP threshold, the open-drain output of the DRV5023-Q1 will go low. The output will remain low until the magnetic flux density drops below B_RP and then becomes high impedance. The output sink current capability is 30 mA. A wide operating voltage range (2.7 to 38 V) with reverse polarity protection up to -22 V makes this device widely suitable for various automotive applications. The device provides internal protection against reverse supply conditions, load dumps, and output short-circuit or overcurrent faults.

• Digital unipolar Hall-effect switch sensor, AEC-Q100 qualified for automotive applications
• Inverted output option (FI)
• Excellent temperature stability, sensitivity within ±10% over temperature range
• Multiple sensitivity options (B_OP/B_RP): 3.5/2 mT (FA, FI), 6.9/3.2 mT (AJ), 14.5/6 mT (BI)
• Wide supply voltage range 2.7V to 38V, no external regulator required
• Open-drain output (30 mA sink current)
• 35 μs fast power-on time
• Compact package size
• Reverse supply protection (up to -22V)
• Load dump protection up to 40V
• Output short-circuit protection
• Output current limiting
• Battery output short-circuit protection

• Docking detection
• Door switch detection
• Proximity sensing
• Valve positioning
• Pulse counting