ST VND5E008MYTR-E

The VND5E008MY-E is a double channel highside driver manufactured using proprietary VIPower M0-5 technology and housed in PowerSSO-36 package. The device is designed to drive 12 V automotive grounded loads, and to provide protection and diagnostics. It also implements a 3V and 5 V CMOS compatible interface for the use with any microcontroller. The device integrates advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off with auto restart and overvoltage active clamp. A dedicated analog current sense pin is associated with every output channel providing enhanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication and overtemperature indication. The current sensing and diagnostic feedback of the whole device can be disabled by pulling the CS_DlS pin high to share the external sense resistor with similar devices.

• Typical value with all loads connected
• Inrush current active management by power limitation
• Very low standby current
• 3.0V CMOS compatible inputs
• Optimized electromagnetic emissions
• Very low electromagnetic susceptibility
• Compliant with European directive 2002/95/EC
• Proportional load current sense
• High current sense precision for wide current range
• Very low current sense leakage
• Diagnostic functions: Current sense disable, Overload and short to ground (power limitation) indication, Thermal shutdown indication
• Protections: Undervoltage shutdown, Overvoltage clamp, Load current limitation, Self limiting of fast thermal transients, Protection against loss of ground and loss of Vcc, Thermal shutdown, Reverse battery protection with self switch on of the Power MOSFET, Electrostatic discharge protection

• All types of resistive, inductive and capacitive loads