LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
ST STM32F078CBY6TR product image
Immagini a scopo illustrativo

ST STM32F078CBY6TR

Produttore
Cod. Prod.
STM32F078CBY6TR
Cod. LCSC
C2054521
Imballo
WLCSP-49
Numero Cliente
Attr. chiave
Low-power ARM Cortex-M0 series 1.8V MCU with 128 KB Flash, 48 MHz CPU, USB, and CEC functionality
Scheda TecnicaST STM32F078CBY6TR
Conformità RoHS3 documenti disponibili
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 3.7971$ 3.80
200+$ 1.4695$ 293.90
500+$ 1.4186$ 709.30
1,000+$ 1.3923$ 1392.30
Package Standard5000/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Embedded/Microcontrollers
ProduttoreST
ImballoWLCSP-49
DAC (Bit)12bit
ADC (Bit)12bit
Number of I/O36
Operating Temperature-40℃~+85℃
Voltage - Supply1.65V~1.95V;1.65V~3.6V
Program Memory TypeFLASH
EEPROM-
Program Storage Size128KB
CPU CoreARM Cortex-M0
Core Size32 Bit
CPU Maximum Speed48MHz
Oscillator TypeBuilt-in

Descrizione

Traduzione AI

Arm-based 32-bit MCU, up to 128 KB Flash, crystal-less USB FS 2.0, CAN, 12 timers, ADC, DAC & comm. interfaces, 2.0 - 3.6 V

Caratteristiche

Traduzione AI
  • Core: Arm 32-bit Cortex-M0 CPU, frequency up to 48 MHz
  • Memories – 64 to 128 Kbytes of Flash memory – 16 Kbytes of SRAM with HW parity
  • CRC calculation unit
  • Reset and power management – Digital and supply: VDD = 2.0 V to 3.6 V – Analog supply: VDDA = VDD to 3.6 V – Selected I/Os; VDDIO2 = 1.65 V to 3.6 V – Power-on/Power down reset (POR/PDR) – Programmable voltage detector (PVD) – Low power modes: Sleep, Stop, Standby – VBAT supply for RTC and backup registers
  • Clock management – 4 to 32 MHz crystal oscillator – 32 kHz oscillator for RTC with calibration – Internal 8 MHz RC with x6 PLL option – Internal 40 kHz RC oscillator – Internal 48 MHz oscillator with automatic trimming based on ext. synchronization
  • Up to 87 fast I/Os – All mappable on external interrupt vectors – Up to 68 I/Os with 5V tolerant capability and 19 with independent supply VDDIO2
  • 7-channel DMA controller
  • One 12-bit, 1.0 μs ADC (up to 16 channels) – Conversion range: 0 to 3.6 V – Separate analog supply: 2.4 V to 3.6 V
  • One 12-bit D/A converter (with 2 channels)
  • 2 fast low-power analog comparators with programmable input and output
  • Up to 24 capacitive sensing channels for touchkey, linear and rotary touch sensors
  • Calendar RTC with alarm and periodic wakeup from Stop/Standby
  • 12 timers One 16-bit advanced-control timer for six-channel PWM output One 32-bit and seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding or DAC control Independent and system watchdog timers SysTick timer
  • Communication interfaces 2 I²C interfaces supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, one supporting SMBus/PMBus and wakeup 4 USARTs supporting master synchronous SPI and modem control, two with ISO7816 interface, LIN, IrDA, auto baud rate detection and wakeup feature 2 SPIs (18 Mbit/s) with 4 to 16 programmable bit frames, and with I²S interface multiplexed CAN interface USB 2.0 full-speed interface, able to run from internal 48 MHz oscillator and with BCD and LPM support HDMI CEC wakeup on header reception
  • Serial wire debug (SWD)
  • 96-bit unique ID All packages ECOPACK2