FTDI UMFT602A

The UMFT602A/X is an evaluation/development module with either HSMC or FMC (LPC) connectors for interfacing FTDI’s FT602 32bit FIFO bus to USB 3.1 GEN 1 USB video class (UVC) bridge IC with external hardware. The UMFT602A/X allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT602. As a daughter card, the UMFT602A/X must work with a FIFO master board which has either a HSMC or FMC connector. There are 2 models which provide different FIFO bus interfaces with 32bit data width. The modules are designed such that they can plug into most FPGA development platforms supplied by vendors such as Xilinx or Altera. The UMFT602A/X supports 2 parallel slave FIFO bus protocols (Multi-Channel FIFO / 245 Synchronous FIFO) with a data “burst” rate of up to 400MB/s.

• Supports USB 3.1 GEN 1 Super Speed (5Gbps)/USB 2.0 High Speed (480Mbps) transfer
• UVC 1.1, Raw YUV422, support 14 UVC resolutions
• Up to 4 video input channels. One I2C bus master interface for video source device configuration
• Supports multi voltage I/O: 1.8V, 2.5V and 3.3V
• High speed connector for FIFO bus: FMC(Field Programmable Mezzanine Card) or HSMC (High Speed Mezzanine Card)
• FMC connector is compatible with most Xilinx FPGA reference design boards
• HSMC is compatible with most Altera FPGA reference design boards
• Multi powered options: external DC powered, BUS powered, FMC/HSMC powered
• Hardware Reset
• Micro-USB3.0 receptacle, USB3.0 compliant and certified