ZE FBMA-11-321611-601A30T

The specification is described as FBMA - 11 - 321611 - 601A30T, manufactured in Taichung, Taiwan. The operating temperature range is -55℃ ~ +125℃, and the storage temperature range is -10℃ ~ +40℃. Regarding reflow soldering conditions, the maximum allowable temperature difference between the solder and ferrite surface during preheating is limited to 150℃, and the maximum temperature difference when cooling into solvent after soldering is limited to 100℃. Insufficient preheating may cause ferrite cracking. Products should be soldered within the allowable range indicated by the diagonal lines. Excessive soldering may cause electrode corrosion. For repeated soldering, the allowable time refers to the cumulative time. Iron rework should be limited to one time only. Care should be taken not to allow the soldering iron tip to directly contact the product, as thermal shock may cause cracking of the ferrite material. The amount of solder used should not exceed the upper limit shown below. Increasing the solder volume will increase the mechanical stress on the product, and exceeding the solder amount may result in mechanical or electrical performance failure.

• Operating temperature range: -55℃ ~ +125℃
• Storage temperature range: -10℃ ~ +40℃
• Reflow soldering preheat temperature differential max 150℃, cooling temperature differential max 100℃
• Iron rework limited to one time