FTDI UMFT311EV
| Manufacturer | |
| MPN | UMFT311EV |
| LCSC Part # | C17650691 |
| Packaging | - |
| Customer # | |
| Key Attributes | Evaluation and Demonstration Boards and Kits RoHS |
| Datasheet |  FTDI UMFT311EV |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Evaluation and Demonstration Boards and Kits | |
| Manufacturer | FTDI | |
| Packaging | - | |
| Operating Temperature | -40℃~+85℃ | |
| Features | USB to UART;USB to SPI/I²C |
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Evaluation and Demonstration Boards and Kits | |
| Manufacturer | FTDI | |
| Packaging | - |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+85℃ | |
| Features | USB to UART;USB to SPI/I²C |
Introduction
The FT311D Development Module is a development module which utilises the FT311D IC to develop USB accessories connecting to Android platforms via Android Open Accessory mode. It is a Full Speed USB host specifically targeted at providing access to peripheral hardware from an Android platform with a USB device port. The FT311D Development Module is intended for use as a hardware platform to enable easy evaluation of FTDI’s FT311D Android Open Accessory USB Host controller. The FT311D Development Module includes all the necessary components required by a user to begin developing Android Open Accessory applications based on the FT311D device. The FT311D Development Module behaves like a bridge between an Android device and the various I/O available.
Features
- Entire USB protocol handled on the chip
- Any one of the six user selectable interface types: GPIO, UART, PWM, I2C Master, SPI Master, SPI Slave
- Interface options selectable via 3 mode select pins
- 7 GPIO lines interface option
- Basic UART interface with RXD, TXD, RTS, CTS, TX_ACTIVE pins option
- 4 PWM channels option
- I2C Master interface option
- SPI Slave interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options
- SPI Master interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options
- Suitable for use on any Android platform supporting Android Open Accessory Mode (Typically 3.1 onwards, however some platforms may port Open Accessory Mode to version 2.3.4)
- 12MHz external crystal
- Standard USB Host connector to connect with Android USB Slave device
- +5V Single Supply Operation
- USB 2.0 Full Speed compatible
- Extended operating temperature range: - 40 to +85℃
- Reduce development time
- Rapid integration into existing systems
- Easy to use Android Open Accessory Module translating the USB Device port of the android tablet into any one of the six selectable interfaces like GPIO, UART, PWM, I2C Master, SPI Slave or SPI Master
- Selection of interface mode using jumpers JP1, JP2 and JP3
- USB Type - A connector CN1 for connecting to Android USB slave peripherals
- IO port connectors CON1 / J3 and J4 used for the interface signals based on the selected interface mode
Applications
- Connecting Android phones to USB accessories
- Home automation via Android devices
- Connecting Android tablets to USB accessories
- Data logging from USB accessories
- Controlling instrumentation from Android
- Connecting printing devices to Android devices
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 95.3614 | $ 95.36 |
| 200+ | $ 38.0504 | $ 7610.08 |
Standard Packaging5/Full Bag | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Evaluation and Demonstration Boards and Kits | |
| Manufacturer | FTDI | |
| Packaging | - | |
| Operating Temperature | -40℃~+85℃ | |
| Features | USB to UART;USB to SPI/I²C |
| Type | Description | |
|---|---|---|
| Category | Development Boards, Kits, Programmers/Evaluation Boards/Evaluation and Demonstration Boards and Kits | |
| Manufacturer | FTDI | |
| Packaging | - |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+85℃ | |
| Features | USB to UART;USB to SPI/I²C |
Introduction
The FT311D Development Module is a development module which utilises the FT311D IC to develop USB accessories connecting to Android platforms via Android Open Accessory mode. It is a Full Speed USB host specifically targeted at providing access to peripheral hardware from an Android platform with a USB device port. The FT311D Development Module is intended for use as a hardware platform to enable easy evaluation of FTDI’s FT311D Android Open Accessory USB Host controller. The FT311D Development Module includes all the necessary components required by a user to begin developing Android Open Accessory applications based on the FT311D device. The FT311D Development Module behaves like a bridge between an Android device and the various I/O available.
Features
- Entire USB protocol handled on the chip
- Any one of the six user selectable interface types: GPIO, UART, PWM, I2C Master, SPI Master, SPI Slave
- Interface options selectable via 3 mode select pins
- 7 GPIO lines interface option
- Basic UART interface with RXD, TXD, RTS, CTS, TX_ACTIVE pins option
- 4 PWM channels option
- I2C Master interface option
- SPI Slave interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options
- SPI Master interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options
- Suitable for use on any Android platform supporting Android Open Accessory Mode (Typically 3.1 onwards, however some platforms may port Open Accessory Mode to version 2.3.4)
- 12MHz external crystal
- Standard USB Host connector to connect with Android USB Slave device
- +5V Single Supply Operation
- USB 2.0 Full Speed compatible
- Extended operating temperature range: - 40 to +85℃
- Reduce development time
- Rapid integration into existing systems
- Easy to use Android Open Accessory Module translating the USB Device port of the android tablet into any one of the six selectable interfaces like GPIO, UART, PWM, I2C Master, SPI Slave or SPI Master
- Selection of interface mode using jumpers JP1, JP2 and JP3
- USB Type - A connector CN1 for connecting to Android USB slave peripherals
- IO port connectors CON1 / J3 and J4 used for the interface signals based on the selected interface mode
Applications
- Connecting Android phones to USB accessories
- Home automation via Android devices
- Connecting Android tablets to USB accessories
- Data logging from USB accessories
- Controlling instrumentation from Android
- Connecting printing devices to Android devices
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |
| Type | Details |
|---|---|
| RoHS | |
| ECCN | EAR99 |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| Type | Details |
|---|---|
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |