ADI AD7656BSTZ-1
| Produttore | |
| Cod. Prod. | AD7656BSTZ-1 |
| Cod. LCSC | C495030 |
| Imballo | LQFP-64(10x10) |
| Numero Cliente | |
| Attr. chiave | 250 ksps, six-channel, simultaneous-sampling bipolar ADC |
| Scheda Tecnica | ADI AD7656BSTZ-1 |
| Conformità RoHS | 1 documenti disponibili |
| Parti alternative | 5 |
Specifiche del Prodotto
Tutto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Produttore | ADI | |
| Imballo | LQFP-64(10x10) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | Parallel Port;Serial Port | |
| Quiescent Current (Iq) | 26mA | |
| Voltage - Supply | 4.75V~5.25V | |
| Number of Channels | 6 | |
| Integral non - linearity | 3LSB | |
| Voltage Reference | Built-in | |
| Clock/Oscillator | Built-in | |
| Clock Frequency | - | |
| Features | Bipolar input;Simultaneous sampling;Bipolar power supply;Soft reset;Power-on reset | |
| Resolution(Bits) | 250kHz;16 | |
| S/N Ratio | 88dB | |
| DNL (LSB) | - | |
| ADC architecture | SAR | |
| Programmable Gain | Not supported |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Produttore | ADI | |
| Imballo | LQFP-64(10x10) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | Parallel Port;Serial Port | |
| Quiescent Current (Iq) | 26mA | |
| Voltage - Supply | 4.75V~5.25V | |
| Number of Channels | 6 | |
| Integral non - linearity | 3LSB |
| Tipo | Descrizione | |
|---|---|---|
| Voltage Reference | Built-in | |
| Clock/Oscillator | Built-in | |
| Clock Frequency | - | |
| Features | Bipolar input;Simultaneous sampling;Bipolar power supply;Soft reset;Power-on reset | |
| Resolution(Bits) | 250kHz;16 | |
| S/N Ratio | 88dB | |
| DNL (LSB) | - | |
| ADC architecture | SAR | |
| Programmable Gain | Not supported |
Aiuto & FeedbackMostra prodotti simili (0) >
Caratteristiche
Traduzione AI
- Pin-compatible and software-compatible with AD7656/AD7657/AD7658, with reduced decoupling requirements
- 6 independent ADCs
- True bipolar analog input pins/software-selectable ranges: ±10V, ±5V
- High throughput rate: 250kSPS
- iCMOS process technology
- Low power consumption 140mW (250kSPS, 5V supply)
- High noise immunity, wide bandwidth
- SNR 88dB (at 10kHz input frequency)
- On-chip reference and buffer
- High-speed parallel, serial, and daisy-chain interface modes
- High-speed serial interface SPI/QSPI/MICROWIRE, DSP-compatible
- Standby mode: 315μW maximum
- 64-lead LQFP package
- AD7656-1/AD7657-1/AD7658-1 are pin- and software-compatible versions of the AD7656/AD7657/AD7658 with reduced decoupling requirements, each integrating 6 channels of 16/14/12-bit, fast, low-power successive approximation ADCs in a single package, designed using iCMOS (industrial CMOS) process technology.
- iCMOS is a process that combines high-voltage silicon with submicron CMOS and complementary bipolar technologies. This process enables the development of high-performance analog ICs operating at up to 33V, achieving a size-to-performance ratio previously unattainable with conventional high-voltage devices. Unlike analog ICs built on traditional CMOS processes, iCMOS devices accept bipolar input signals while delivering improved performance, significantly reduced power consumption, and smaller package sizes.
- All three devices offer throughput rates up to 250kSPS and integrate low-noise, wide-bandwidth track-and-hold amplifiers capable of handling input frequencies up to 4.5MHz.
- The conversion process and data acquisition are controlled via the CONVST signal and an internal oscillator. Three CONVST pins (CONVSTA, CONVSTB, and CONVSTC) allow three pairs of ADCs to perform simultaneous sampling independently.
- AD7656-1/AD7657-1/AD7658-1 feature a high-speed parallel interface and a high-speed serial interface, facilitating connection between the devices and a microprocessor or DSP. When serial interface mode is selected, each device allows multiple ADCs to be connected in a daisy-chain configuration to a single serial interface.
- All three devices support true bipolar input signals in both the ±4×VREF and ±2×VREF ranges, and also integrate an on-chip 2.5V reference.
Applicazioni
Traduzione AI
- Power line monitoring and measurement systems
- Instrumentation and control systems
- Multi-axis positioning systems
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni
Specifiche del Prodotto
Tutto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Produttore | ADI | |
| Imballo | LQFP-64(10x10) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | Parallel Port;Serial Port | |
| Quiescent Current (Iq) | 26mA | |
| Voltage - Supply | 4.75V~5.25V | |
| Number of Channels | 6 | |
| Integral non - linearity | 3LSB | |
| Voltage Reference | Built-in | |
| Clock/Oscillator | Built-in | |
| Clock Frequency | - | |
| Features | Bipolar input;Simultaneous sampling;Bipolar power supply;Soft reset;Power-on reset | |
| Resolution(Bits) | 250kHz;16 | |
| S/N Ratio | 88dB | |
| DNL (LSB) | - | |
| ADC architecture | SAR | |
| Programmable Gain | Not supported |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC) | |
| Produttore | ADI | |
| Imballo | LQFP-64(10x10) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | Parallel Port;Serial Port | |
| Quiescent Current (Iq) | 26mA | |
| Voltage - Supply | 4.75V~5.25V | |
| Number of Channels | 6 | |
| Integral non - linearity | 3LSB |
| Tipo | Descrizione | |
|---|---|---|
| Voltage Reference | Built-in | |
| Clock/Oscillator | Built-in | |
| Clock Frequency | - | |
| Features | Bipolar input;Simultaneous sampling;Bipolar power supply;Soft reset;Power-on reset | |
| Resolution(Bits) | 250kHz;16 | |
| S/N Ratio | 88dB | |
| DNL (LSB) | - | |
| ADC architecture | SAR | |
| Programmable Gain | Not supported |
Aiuto & FeedbackMostra prodotti simili (0) >
Caratteristiche
Traduzione AI
- Pin-compatible and software-compatible with AD7656/AD7657/AD7658, with reduced decoupling requirements
- 6 independent ADCs
- True bipolar analog input pins/software-selectable ranges: ±10V, ±5V
- High throughput rate: 250kSPS
- iCMOS process technology
- Low power consumption 140mW (250kSPS, 5V supply)
- High noise immunity, wide bandwidth
- SNR 88dB (at 10kHz input frequency)
- On-chip reference and buffer
- High-speed parallel, serial, and daisy-chain interface modes
- High-speed serial interface SPI/QSPI/MICROWIRE, DSP-compatible
- Standby mode: 315μW maximum
- 64-lead LQFP package
- AD7656-1/AD7657-1/AD7658-1 are pin- and software-compatible versions of the AD7656/AD7657/AD7658 with reduced decoupling requirements, each integrating 6 channels of 16/14/12-bit, fast, low-power successive approximation ADCs in a single package, designed using iCMOS (industrial CMOS) process technology.
- iCMOS is a process that combines high-voltage silicon with submicron CMOS and complementary bipolar technologies. This process enables the development of high-performance analog ICs operating at up to 33V, achieving a size-to-performance ratio previously unattainable with conventional high-voltage devices. Unlike analog ICs built on traditional CMOS processes, iCMOS devices accept bipolar input signals while delivering improved performance, significantly reduced power consumption, and smaller package sizes.
- All three devices offer throughput rates up to 250kSPS and integrate low-noise, wide-bandwidth track-and-hold amplifiers capable of handling input frequencies up to 4.5MHz.
- The conversion process and data acquisition are controlled via the CONVST signal and an internal oscillator. Three CONVST pins (CONVSTA, CONVSTB, and CONVSTC) allow three pairs of ADCs to perform simultaneous sampling independently.
- AD7656-1/AD7657-1/AD7658-1 feature a high-speed parallel interface and a high-speed serial interface, facilitating connection between the devices and a microprocessor or DSP. When serial interface mode is selected, each device allows multiple ADCs to be connected in a daisy-chain configuration to a single serial interface.
- All three devices support true bipolar input signals in both the ±4×VREF and ±2×VREF ranges, and also integrate an on-chip 2.5V reference.
Applicazioni
Traduzione AI
- Power line monitoring and measurement systems
- Instrumentation and control systems
- Multi-axis positioning systems
C495030 Libreria EasyEDA
Conformità & Codici di Esportazione
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Tipo | Dettagli |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



