LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
SILICON LABS C8051F300-GMR product image
  • C8051F300-GMR thumbnail 1
  • C8051F300-GMR thumbnail 2
  • C8051F300-GMR thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

SILICON LABS C8051F300-GMR

Produttore
Cod. Prod.
C8051F300-GMR
Cod. LCSC
C31701
Imballo
WSON-10-EP(3x3)
Numero Cliente
Attr. chiave
Mixed Signal ISP Flash MCU Family
Scheda TecnicaSILICON LABS C8051F300-GMR
Conformità RoHS1 documenti disponibili
Disponibile: 2,722
2,722 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 1.6701$ 1.67
10+$ 1.5167$ 15.17
30+$ 1.4204$ 42.61
100+$ 1.3224$ 132.24
500+$ 1.2783$ 639.15
1,500+$ 1.2587$ 1888.05
Package Standard1500/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Embedded/Microcontrollers
ProduttoreSILICON LABS
ImballoWSON-10-EP(3x3)
Number of I/O8
Operating Temperature-40℃~+85℃
Program Memory TypeFLASH
Voltage - Supply2.7V~3.6V
EEPROM-
Program Storage Size8KB
CPU Core51 Series
Core Size8 Bit
CPU Maximum Speed25MHz
Oscillator TypeBuilt-in

Caratteristiche

Traduzione AI
  • 8-Bit ADC ('F300/2 only): Up to 500 ksps, Up to 8 external inputs, Programmable amplifier gains of 4, 2, 1, & 0.5, VREF from external pin or VDD, Built-in temperature sensor, External conversion start input
  • Comparator: Programmable hysteresis and response time, Configurable as interrupt or reset source, Low current (<0.5 μA)
  • On-chip debug: On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (no emulator required), Provides breakpoints, single stepping, inspect/modify memory and registers, Superior performance to emulation systems using ICE-chips, target pods, and sockets, Complete development kit
  • Supply Voltage: 2.7 to 3.6 V, Typical operating current: 6.6 mA @ 25 MHz; 14 μA @ 32 kHz, Typical stop mode current: 0.1 μA, Temperature range: -40 to +85 ℃
  • High Speed 8051 μc Core: Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks, Up to 25 MIPS throughput with 25 MHz clock, Expanded interrupt handler
  • Memory: 256 bytes internal data RAM, Up to 8 kB (‘F300/1/2/3), 4 kB (‘F304), or 2 kB (‘F305) Flash; 512 bytes are reserved in the 8 kB devices
  • Digital Peripherals: 8 Port I/O; All 5 V tolerant with high sink current, Hardware enhanced UART and SMBus serial ports, Three general-purpose 16-bit counter/timers, 16-bit programmable counter array (PCA) with three capture/compare modules, Real time clock mode using PCA or timer and external clock source
  • Clock Sources: Internal oscillator: 24.5 MHz with ±2% accuracy supports UART operation, External oscillator: Crystal, RC, C, or clock (1 or 2 pin modes), Can switch between clock sources on-the-fly; Useful in power saving modes