Infineon/CYPRESS CYPM1111-40LQXI

EZ-PD PMG1 (Power Delivery Microcontroller Generation 1) is a family of high-voltage USB-C power delivery microcontrollers. These devices integrate an Arm Cortex-M0/M0+ CPU and a USB-C power delivery controller, along with analog and digital peripherals. EZ-PD PMG1 targets embedded systems that source or sink power through high-voltage USB-C power delivery ports and leverage a microcontroller for additional control functions.

• 32-bit microcontroller subsystem: 48-MHz Arm Cortex-M0 CPU, 128-KB flash, 12-KB SRAM, 16K SROM to free up flash space (8 KB boot SROM and 8 KB user SROM)
• Type-C/USB power delivery module: supports latest USB PD 3.0 specification, fast role swap, extended data messaging, integrated current source (RP) for downstream port role, integrated RD resistor for upstream port role, integrated VCONN FET for powering EMCA cables, integrated dead battery termination, integrated high-voltage protection on CC and SBU pins against accidental short to VBUS pin on Type-C connector
• Legacy charging (source and sink): BCv1.2, Apple
• Multiplexers: integrated USB 2.0 analog multiplexer for USB 2.0 high-speed data, integrated SBU analog multiplexer for alternate mode
• Integrated VBUS load switch controller: supports up to 20 V on VBUS provider path, controlled slew rate gate driver rated 24 V for driving external VBUS PFET on provider path, 24 V-rated gate driver for driving external VBUS PFET on consumer path, configurable hardware-controlled VBUS OVP, UVP, OCP, SCP, and reverse current protection, VBUS high-side current sense amplifier capable of measuring current across 5-mΩ series resistor, responds to fast role swap requests by turning off consumer PFET and turning on provider PFET
• LDO regulator: integrated high-voltage LDO operating up to 21.5 V for dead battery mode operation
• Interfaces: two integrated timers and counters meeting USB PD protocol response time requirements, four runtime SCBs with reconfigurable I2C, SPI, or UART functionality
• Clocks and oscillators: integrated oscillator, no external clock required
• Power supply: VSYS (2.75 V~5.5 V), VBUS (4 V~21.5 V)
• Fail-safe: I2C pins from SCB0 are fail-safe pins
• Package: 6.0 mm × 6.0 mm, 0.6 mm pitch, 40-pin QFN; supports industrial temperature range (-40°C ~ +85°C)
• Software tools: ModusToolbox