MICROCHIP A2F500M3G-1CS288I

The SmartFusion Customizable System-on-Chip (cSoC) integrates multiple subsystems with high performance and versatility. It features a Hard 100 MHz 32-bit ARM Cortex-M3 Processor with diverse memory and communication interfaces. Based on the proven ProASIC3 FPGA Fabric, it utilizes a low-power, soft-error-immune 130-nm, 7-Layer Metal, Flash-Based CMOS process. It incorporates a programmable analog front end and analog compute engine to offload analog processing tasks from the Cortex-M3. I/O supports multiple standards and data rates, powered by a single 3.3 V supply with an internal 1.5 V regulator.

• Hard 100 MHz 32-bit ARM Cortex - M3 Processor，1.25 DMIPS/MHz Throughput from Zero Wait State Memory
• Memory Protection Unit (MPU)
• Single Cycle Multiplication, Hardware Divide
• JTAG Debug (4 wires), Serial Wire Debug (SWD, 2 wires), and Single Wire Viewer (SWV) Interfaces
• Embedded Nonvolatile Flash Memory (eNVM), 128 Kbytes to 512 Kbytes
• Embedded High - Speed SRAM (eSRAM), 16 Kbytes to 64 Kbytes, Implemented in 2 Physical Blocks to Enable Simultaneous Access from 2 Different Masters
• Multi - Layer AHB Communications Matrix Provides up to 16 Gbps of On - Chip Memory Bandwidth
• 10/100 Ethernet MAC with RMII Interface
• Programmable External Memory Controller, Supports Asynchronous Memories (NOR Flash, SRAM, PSRAM) and Synchronous SRAMs
• Two I²C Peripherals
• Two 16550 Compatible UARTs
• Two SPI Peripherals
• Two 32 - bit Timers
• 32 - bit Watchdog Timer
• 8 - channel DMA Controller
• 32 KHz to 20 MHz Main Oscillator
• Battery - Backed 32 KHz Low Power Oscillator with Real - Time Counter (RTC)
• 100 MHz Embedded RC Oscillator; 1% Accurate
• Embedded Analog PLL with 4 Output Phases (0, 90, 180, 270)
• Based on proven ProASIC B₃ FPGA Fabric
• Low Power, Firm - Error Immune 130 - nm, 7 - Layer Metal, Flash - Based CMOS Process
• Nonvolatile, Instant On, Retains Program When Powered Off
• 350 MHz System Performance
• Embedded SRAMs and FIFOs, Variable Aspect Ratio 4,608 - Bit SRAM Blocks x1, x2, x4, x9, and x18 Organizations
• True Dual - Port SRAM (excluding x18)
• Programmable Embedded FIFO Control Logic
• Secure ISP with 128 - bit AES via JTAG
• FlashLock to Secure FPGA Contents
• Five Clock Conditioning Circuits (CCCs) with up to 2 Integrated Analog PLLs, Phase Shift, Multiply/Divide, and Delay Capabilities, Frequency: Input 1.5–350 MHz, Output 0.75 to 350 MHz
• 500 Ksps in 12 - Bit Mode, 550 Ksps in 10 - Bit Mode, 600 Ksps in 8 - Bit Mode
• Internal 2.56 V Reference or Optional External Reference
• One First - Order  DAC (sigma - delta) per ADC, 8 - Bit, 16 - Bit, or 24 - Bit 500 Ksps Update Rate
• Up to 5 High - Performance Analog Signal Conditioning Blocks (SCB) per Device, Each Including: Two High - Voltage Bipolar Voltage Monitors (with 4 input ranges from ±2.5 V to - 11.5/+14 V) with 1% Accuracy, High Gain Current Monitor, Differential Gain = 50, up to 14 V, Common Mode Temperature Monitor (Resolution = 1/℃ in 12 - Bit Mode; Accurate from - 55℃ to 150℃)
• Up to Ten High - Speed Voltage Comparators (tₚd = 15 ns)
• Offloads Cortex - M3–Based MSS from Analog Initialization and Processing of ADC, DAC, and SCBs
• Sample Sequence Engine for ADC and DAC Parameter Set - Up
• Post - Processing Engine for Functions such as Low - Pass Filtering and Linear Transformation
• Easily Configured via GUI in Libero System - on - Chip (SoC) Software
• FPGA I/Os: LVDS, PCI, PCI - X, up to 24 mA IOH/IOL, Up to 350 MHz
• MSS I/Os: Schmitt Trigger, up to 6 mA IOH, 8 mA IOL, Up to 180 MHz
• Single 3.3 V Power Supply with On - Chip 1.5 V Regulator
• External 1.5 V Is Allowed by Bypassing Regulator (digital VCC = 1.5 V for FPGA and MSS, analog VCC = 3.3 V and 1.5 V)