LCSC Electronics logoLCSC Electronics svg logo
Zaloguj
USD
NXP TJA1100HNZ product image
  • TJA1100HNZ thumbnail 1
  • TJA1100HNZ thumbnail 2
  • TJA1100HNZ thumbnail 3
  • Rozmieszczenie wyprowadzeń
  • Footprint
Zdjęcia poglądowe

NXP TJA1100HNZ

Producent
Nr części prod.
TJA1100HNZ
Nr LCSC
C157613
Opak.
HVQFN-36-EP(6x6)
Numer Klienta
Klucz. cechy
100BASE-T1PHY for Automotive Ethernet
Karta KatalogowaNXP TJA1100HNZ
Zgodność z RoHS2 dokumentów dostępnych
Gwarancja na każde zamówienie
100% Oryginalne · Zwrot lub Wymiana w ciągu 30 Dni
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
Szt.Cena jedn.(Tylko do wglądu)Suma całkowita
1+$ 2.8198$ 2.82
10+$ 2.4249$ 24.25
30+$ 2.1785$ 65.36
100+$ 1.9239$ 192.39
500+$ 1.8097$ 904.85
1,000+$ 1.7607$ 1760.70
Standardowa Obudowa4000/Full Reel
Lepsza cena za większą ilość?
$

Specyfikacje Produktu

Wszystko
TypOpis
KategoriaIntegrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers
ProducentNXP
Opak.HVQFN-36-EP(6x6)
Voltage - Supply3.3V
TypePHY Transceiver
Ethernet Speed Standards100BASE-T1
Data Rate100Mbit/s
number of channels-
Operating Temperature-40℃~+125℃
FeaturesLow-power mode;Cable diagnostics;Programmable LED indication;Under-voltage lockout (UVLO)
InterfaceMII;RMII

Opis

Tłumaczenie AI

The TJA1100 is a 100BASE-T1 compliant Ethernet PHY optimized for automotive use cases. The device provides 100 Mbit/s transmit and receive capability over a single Unshielded Twisted Pair (UTP) cable, supporting a cable length of up to at least 15 m. Optimized for automotive use cases such as IP camera links, driver assistance systems and back-bone networks, the TJA1100 has been designed to minimize power consumption and system costs, while still providing the robustness required for automotive use cases.

Funkcje

Tłumaczenie AI
  • Transmitter optimized for capacitive coupling to unshielded twisted-pair cable
  • Enhanced integrated PAM-3 pulse shaping for low RF emissions
  • Adaptive receive equalizer optimized for automotive cable length of up to at least 15 m
  • Reduced power consumption through configurable transmitter pulse amplitude adapted to cable length
  • Dedicated PHY enable/disable input pin to minimize power consumption
  • Low-power Sleep mode with local wake-up support
  • Robust remote wake-up via the bus lines
  • Gap-free supply undervoltage detection with fail-silent behavior
  • EMC-optimized output driver strength for Media Independent Interface (MII) and Reduced MII (RMII)
  • Diagnosis of cabling errors (shorts and opens)
  • Small HVQFN-36 package for PCB space-constrained applications
  • MDI pins protected against ESD to ±6 KV HBM and ±6 KV IEC61000-4-2
  • MDI pins protected against transients in automotive environment
  • Automotive-grade temperature range from -40 °C to +125 °C
  • Automotive product qualification in accordance with AEC-Q100
  • MII as well as RMII standard compliant interface
  • Reverse MII mode for back-to-back connection of two PHYs
  • 3V3 single supply operation with on-chip 1.8 V LDO regulators
  • On-chip termination resistors for balanced UTP cable
  • Jumbo frame support up to 16 kB
  • Internal, external and remote loopback mode for diagnosis
  • Bus pins short-circuit proof to battery voltage and ground (including common mode choke, 100 nF coupling capacitors)
  • LED control output for link diagnosis