onsemi NCV7342MW3R2G

The NCV7342 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. Due to the wide common−mode voltage range of the receiver inputs and other design features, the NCV7342 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals.

• Compatible with the ISO 11898−2, ISO 11898−5 Standards
• High Speed (up to 1 Mbps)
• VIO Pin on NCV7342−3 Version Allowing Direct Interfacing with 3 V to 5 V Microcontrollers
• VSPLIT Pin on NCV7342−0 Version for Bus Common Mode Stabilization
• Very Low Current Consumption in Standby Mode with Wake−up via the Bus
• Excellent Electromagnetic Susceptibility (EMS) Level Over Full Frequency Range. Very Low Electromagnetic Emissions (EME) Low EME Also Without Common Mode (CM) Choke
• Bus Pins Protected Against >15 kV System ESD Pulses
• Transmit Data (TxD) Dominant Time−out Function
• Bus Dominant Time−out function in Standby Mode
• Under All Supply Condition the Chip Behaves Predictably
• No Disturbance of the Bus Lines with an Unpowered Node
• Thermal Protection
• Bus Pins Protected Against Transients in an Automotive Environment
• Bus Pins Short Circuit Proof to Supply Voltage and Ground
• These are Pb−Free Devices

• Automotive
• Industrial Networks