LCSC Electronics logoLCSC Electronics svg logo
Connexion
USD

Nisshinbo Micro Devices Inc. RP105N081D-TR-FE

Fabricant
Réf. Fab.
RP105N081D-TR-FE
Réf. LCSC
C6660462
Condit.
SOT-23-5
Numéro Client
Caract. clés
800mV Positive Fixed SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS
Fiche TechniqueNisshinbo Micro Devices Inc. RP105N081D-TR-FE
Pièces alternatives5
Garantie sur chaque commande
100% Authentique · Retour ou échange sous 30 Jours

Spécifications du Produit

Tout
TypeDescription
CatégorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
FabricantNisshinbo Micro Devices Inc.
Condit.SOT-23-5
Output Voltage800mV
Number of Outputs1
Operating Temperature-40℃~+85℃
Supply Current (Iq)28uA
Output ConfigurationPositive
Operating Voltage5.25V
Output Current400mA
FeaturesEnable control;Input under-voltage protection;Short Circuit Protection;Output discharge;Thermal shutdown
Output TypeFixed

Description

Traduction par IA

The RP105x is a 400 mA output type CMOS-based voltage regulator with capability of low input voltage (Min. 0.9 V) and low output voltage (Min. 0.6 V). This device is remarkably improved the performance at low input voltage compared with conventional low voltage LDOs, and two power supply voltage type. (Another power source, VBIAS pin voltage must be Min. 2.4 V). The device consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit to avoid the destruction, a UVLO circuit with monitoring input voltage, and so on. The RP105x has the ultra-low on resistance output driver, the on resistance is Typ. 0.4 Ω (V_OUT = 0.8 V, IOUT = 300 mA). The built-in driver is Nch MOSFET, thus the load transient response is excellent, (under the condition of the current between 1 mA and 400 mA, tr = 0.5 μs, the undershoot level is approximately 50 mV). The output voltage of this device is fixed with high accuracy. Since the packages for the device are DFN(PL)1212-6, DFN1212-5, SOT-23-5 and SC-88A therefore high density mounting of the IC on boards is possible.

Caractéristiques

Traduction par IA
  • Supply Current .. .. Typ. 28 μA
  • Standby Current .. . Typ. 0.1 μA
  • Ripple Rejection .... . Typ. 80 dB (f = 1 KHz, VIN Ripple) . Typ. 50 dB (f = 1 KHz, VBIAS Ripple)
  • Output Voltage Range ........ ... 0.6 V to 1.5 V (0.1 V step)
  • Input Voltage Range (VBIAS) .. . 2.4 V to 5.25 V (Vour < 0.8 V) Set VOUT + 1.6 V to 5.25 V (Vout ≥ 0.8 V)
  • Input Voltage Range (VIN) . . RP105xxxxB/D: 0.9 V to VBIAS (Vour < 0.8 V) Set VOUT + 0.1 V to VBIAS (ΔV_OUT ≥ 0.8 V) RP105xxxxE/F: 0.9 V to VBIAS
  • Output Voltage Accuracy ...... . Typ. ±15 mV Ta = 25°C
  • Temperature-Drift Coefficient of Output Voltage ...... Typ. ±50 ppm/°C
  • Dropout Voltage ........ .. DFN1212-5: Typ. 105 mV (Iour = 400 mA, VOUT = 1.5 V, VBIAS = 3.6 V)
  • Line Regulation .. . Typ. 0.02%/V
  • Packages .. . DFN(PL)1212-6, SC-88A, SOT-23-5, DFN1212-5
  • Built-in Fold Back Protection Circuit . . Typ. 120 mA (Current at short mode)
  • Ceramic capacitors are recommended .......... ... CBIAS = C_IN = 1.0 μF or more, C_out = 2.2 μF or more

Applications

Traduction par IA
  • Power source for battery-powered equipment.
  • Power source for electrical appliances such as cameras, VCRs and camcorders.
  • Power source for portable communication equipment.