LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
RENESAS R5F566TAAGFM#10 product image
Immagini a scopo illustrativo

RENESAS R5F566TAAGFM#10

Produttore
RENESAS
Cod. Prod.
R5F566TAAGFM#10
Cod. LCSC
C3230361
Imballo
LFQFP-64(10x10)
Numero Cliente
Attr. chiave
RXv3 32 Bit 160MHz LFQFP-64(10x10) Microcontrollers RoHS
Scheda TecnicaRENESAS R5F566TAAGFM#10
Parti alternative5
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Embedded/Microcontrollers
ProduttoreRENESAS
ImballoLFQFP-64(10x10)
DAC (Bit)12bit
ADC (Bit)12bit
Number of I/O39
Operating Temperature-40℃~+105℃
Program Memory TypeFLASH
Voltage - Supply2.7V~5.5V
EEPROM32KB
Program Storage Size256KB
CPU CoreRXv3
Core Size32 Bit
CPU Maximum Speed160MHz
Oscillator TypeBuilt-in
Aiuto & FeedbackMostra prodotti simili (0) >

Caratteristiche

Traduzione AI
  • 32-bit RXv3 CPU core
    • Maximum operating frequency: 160 MHz
    • 928 CoreMark at 160 MHz
    • JTAG and FINE (single-wire) debug interfaces
  • Low-power design and architecture
    • Single power supply, voltage range 2.7 V to 5.5 V
    • Four low-power modes
  • On-chip code flash
    • 1 MB, 512 KB, and 256 KB versions
    • Zero wait states at up to 120 MHz or on ROM cache hit
    • User code programmable on-board or off-board
  • On-chip data flash
    • 32 KB, reprogrammable up to 100,000 times
    • Background program/erase operations supported
  • On-chip SRAM, zero wait states
    • 128 KB/64 KB SRAM (zero wait states)
    • 16 KB RAM with ECC (with wait states)
  • Data transfer
    • DMAC: 8 channels
    • DTC: 1 channel
    • Module operation startable via event signals without interrupts
    • Linked operation between modules while CPU is in sleep mode
  • Reset and power management
    • Power-on reset
    • Low voltage detection with voltage setting
  • Clock functions
    • Main clock oscillator resonator frequency: 8 MHz to 24 MHz (usable as PLL reference clock)
    • High-speed on-chip oscillator: 16 MHz/18 MHz/20 MHz (usable as PLL reference clock)
    • Low-speed on-chip oscillator: 240 kHz
  • Independent watchdog timer
    • 120 kHz IWDT-dedicated on-chip oscillator clock operation
  • Useful functions compliant with IEC60730
    • Oscillation stop detection, A/D converter self-diagnosis and disconnection detection, clock frequency accuracy measurement circuit, independent watchdog timer, RAM test assisted by DOC and CRCA, etc.
    • Register write protection to prevent overwriting of critical register values
  • External bus
    • Maximum bus clock: 40 MHz
    • Four chip select areas
    • Selectable 8-bit or 16-bit bus space per area
  • Multiple communication interfaces
    • Full-speed USB 2.0 host/function or OTG controller (1 channel)
    • ISO11898-1 compliant CAN with 32 mailboxes (1 channel)
    • Multi-function SCIj and SCIh (up to 6 channels): asynchronous mode, clock synchronous mode, smart card interface mode, simplified SPI, simplified I2C, and extended serial mode
    • SCIi with 16-byte transmit and receive FIFO (1 channel)
    • I2C bus interface up to 400 kbps (fast mode), SMBus operation supported (1 channel)
    • RSPId up to 30 Mbps (1 channel)
  • Up to 31 extended function timers
    • 32-bit GPTW (10 channels): 160 MHz operation, input capture, output compare, PWM waveform: single-phase complementary PWM mode 10 output channels / three-phase complementary PWM mode 3 output channels / five-phase complementary PWM mode 2 output channels, phase count mode, comparator-linked operation (count operation, PWM inversion control)
    • 16-bit MTU3d (9 channels): 160 MHz operation, input capture, output compare, PWM waveform: three-phase complementary PWM mode 2 output channels, phase count mode
    • 8-bit TMR (8 channels)
    • 16-bit CMT (4 channels)
  • High-resolution PWM waveform generation circuit: 4 channels
    • Controls rising/falling edge timing of 32-bit GPTW PWM output waveform with minimum 195 ps resolution (at 160 MHz)
  • 12-bit A/D converter: 3 units, 30 channels total
    • Up to three 12-bit sample-and-hold circuit units: Unit 0 (3 sample-and-hold circuits, 8 channels), Unit 1 (3 sample-and-hold circuits, 8 channels), Unit 2 (14 channels)
    • Programmable gain amplifier with pseudo-differential amplification (3 channels × 2)
  • Analog comparator: 6 channels
  • 12-bit D/A converter: 2 channels
    • Usable as reference voltage for analog comparators
  • Temperature sensor for on-chip temperature measurement
  • Cryptographic functions
    • AES with 128-bit or 256-bit key length, supporting ECB, CBC, GCM, and other modes
    • True random number generator
    • Unauthorized access to crypto engine prohibited, preventing impersonation and tampering
    • Secure key management
  • Up to 110 general-purpose I/O pins
    • 5 V tolerant, open-drain, input pull-up, switchable drive capability