LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
MICROCHIP PIC32MX170F256D-50I/ML product image
  • PIC32MX170F256D-50I/ML thumbnail 1
  • PIC32MX170F256D-50I/ML thumbnail 2
  • PIC32MX170F256D-50I/ML thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

MICROCHIP PIC32MX170F256D-50I/ML

Produttore
MICROCHIP
Cod. Prod.
PIC32MX170F256D-50I/ML
Cod. LCSC
C219582
Imballo
QFN-44-EP(8x8)
Numero Cliente
Attr. chiave
MIPS32 M4K 32 Bit 50MHz QFN-44-EP(8x8) Microcontrollers RoHS
Scheda TecnicaMICROCHIP PIC32MX170F256D-50I/ML
Conformità RoHS2 documenti disponibili
Parti alternative5
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Embedded/Microcontrollers
ProduttoreMICROCHIP
ImballoQFN-44-EP(8x8)
ADC (Bit)10bit
Number of I/O35
Operating Temperature-40℃~+85℃
Voltage - Supply2.3V~3.6V
Program Memory TypeFLASH
EEPROM-
Program Storage Size256KB
CPU CoreMIPS32 M4K
Core Size32 Bit
CPU Maximum Speed50MHz
Oscillator TypeBuilt-in
Aiuto & FeedbackMostra prodotti simili (0) >

Caratteristiche

Traduzione AI
  • MIPS16e® mode for up to 40% smaller code size
  • Code-efficient (C and Assembly) architecture
  • Single-cycle (MAC) 32x16 and two-cycle 32x32 multiply
  • 0.9% internal oscillator
  • Programmable PLLs and oscillator clock sources
  • Fail-Safe Clock Monitor (FSCM)
  • Independent Watchdog Timer
  • Fast wake-up and start-up
  • Low-power management modes (Sleep and Idle)
  • Integrated Power-on Reset and Brown-out Reset
  • 0.5 mA/MHz dynamic current (typical)
  • 44 μA IPD current (typical)
  • Data communication: I²S, LJ, RJ, and DSP modes
  • Control interface: SPI and I²C
  • Master clock: Generation of fractional clock frequencies, Can be synchronized with USB clock, Can be tuned in run-time
  • ADC Module: 10-bit 1.1 Msps rate with one S&H, Up to 10 analog inputs on 28-pin devices and 13 analog inputs on 44-pin devices
  • Flexible and independent ADC trigger sources
  • Charge Time Measurement Unit (CTMU): Supports mTouch™ capacitive touch sensing, Provides high-resolution time measurement (1 ns), On-chip temperature measurement capability
  • Comparators: Up to three Analog Comparator modules, Programmable references with 32 voltage points
  • Five General Purpose Timers: Five 16-bit and up to two 32-bit Timers/Counters
  • Five Output Compare (OC) modules
  • Five Input Capture (IC) modules
  • Peripheral Pin Select (PPS) to allow function remap
  • Real-Time Clock and Calendar (RTCC) module
  • USB 2.0-compliant Full-speed OTG controller
  • Two UART modules (12.5 Mbps): Supports LIN 2.0 protocols and IrDA support
  • Two 4-wire SPI modules (25 Mbps)
  • Two I²C modules (up to 1 Mbaud) with SMBus support
  • PPS to allow function remap
  • Parallel Master Port (PMP)
  • Four channels of hardware DMA with automatic data size detection
  • Two additional channels dedicated for USB
  • Programmable Cyclic Redundancy Check (CRC)
  • 10 mA source/sink on all I/O pins and up to 14 mA on non-standard VOH
  • 5V-tolerant pins
  • Selectable open drain, pull-ups, and pull-downs
  • External interrupts on all I/O pins
  • AEC-Q100 REVG (Grade 2 -40°C to +105°C) planned
  • Class B Safety Library, IEC 60730
  • In-circuit and in-application programming
  • 4-wire MIPS(p) Enhanced JTAG interface
  • Unlimited program and six complex data breakpoints
  • IEEE 1149.2-compatible (JTAG) boundary scan