LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
MAXIM MAX16904SATB55/V+T product image
Abbildung ähnlich

MAXIM MAX16904SATB55/V+T

Hersteller
Herst.-Teilenr.
MAX16904SATB55/V+T
LCSC-Nr.
C2072857
Verp.
TDFN-10-EP(3x3)
Kundennummer
Hauptmerkm.
2.1MHz Step-down type Fixed 600mA 5.5V TDFN-10-EP(3x3) Voltage Regulators - DC DC Switching Regulators RoHS
DatenblattMAXIM MAX16904SATB55/V+T
RoHS-Konformität1 Dokumente verfügbar
Alternativteile5
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
HerstellerMAXIM
Verp.TDFN-10-EP(3x3)
Operating Temperature-40℃~+125℃@(TJ)
Frequency - Switching2.1MHz
FunctionStep-down type
Number of Outputs1
FeaturesFrequency synchronization;EMI optimization (spread spectrum);Operating status indication;Overcurrent Protection;Hiccup current limiting;Light load efficient mode
TopologyBuck
Output TypeFixed
Operating Voltage3.5V~28V
Switch tube (built-in/external)Built-in
Output Current600mA
Output Voltage5.5V
Quiescent Current25uA

Merkmale

KI-Übersetzung
  • The MAX16904 is a small, synchronous buck converter with integrated high-side and low-side switches.
  • The device is designed to deliver 600mA with input voltages from +3.5V to +28V while using only 25μA quiescent current at no load.
  • Voltage quality can be monitored by observing the PGOOD signal.
  • The MAX16904 can operate in dropout by running at 97% duty cycle.
  • The MAX16904 operates at a 2.1MHz frequency, allowing for small external components and reduced output ripple.
  • It guarantees no AM band interference.
  • SYNC input programmability enables three frequency modes for optimized performance: forced fixed-frequency operation, SKIP mode (ultra-low quiescent current of 25μA), and synchronization to an external clock.
  • The MAX16904 can be ordered with spread-spectrum frequency modulation, designed to minimize EMI-radiated emissions due to the modulation frequency.
  • Wide +3.5V to +28V Input Voltage Range
  • Tolerates Input Voltage Transients to +42V
  • 600mA Minimum Output Current with Overcurrent Protection
  • Fixed Output Voltages (See the Selector Guide and Contact Factory for All Available Trimmed Output Voltage Options)
  • 2.1MHz Switching Frequency with Three Modes of Operation
  • 25μA Ultra-Low Quiescent Current SKIP Mode
  • Forced Fixed-Frequency Operation
  • External Frequency Synchronization
  • Optional Spread-Spectrum Frequency Modulation
  • Power-Good Output Enable-Pin Compatible from +3.3V Logic Level to +42V
  • Thermal Shutdown Protection
  • -40℃ to +125℃ Automotive Temperature Range
  • 10-Pin TDFN-EP or 16-Pin TSSOP-EP Packages
  • AEC-Q100 Qualified

Anwendungen

KI-Übersetzung
  • Automotive
  • Industrial