LCSC Electronics logoLCSC Electronics svg logo
Connexion
USD

TI CD4516BEE4

Fabricant
Réf. Fab.
CD4516BEE4
Réf. LCSC
C20345280
Condit.
PDIP-16
Numéro Client
Caract. clés
Rising Edge PDIP-16 Counters, Dividers RoHS
Fiche TechniqueTI CD4516BEE4
Conformité RoHS1 documents disponibles
Pièces alternatives1
Garantie sur chaque commande
100% Authentique · Retour ou échange sous 30 Jours

Spécifications du Produit

Tout
TypeDescription
CatégorieIntegrated Circuits (ICs)/Logic/Counters, Dividers
FabricantTI
Condit.PDIP-16
Logic Family-
Voltage - Supply3V~18V
DirectionUp Counter;Down Counter
Trigger TypeRising Edge
TimingSynchronous
Reset-
Operating Temperature-55℃~+125℃
Number of Elements-
Propagation Delay75ns@15V,50pF
Count Rate-
FeaturesMulti-mode counting;Synchronous counting;Cascade counter;Reset function

Description

Traduction par IA

CD4510B is a presettable BCD counter and CD4516B is a presettable binary counter; both are high-voltage CMOS presettable up/down counters rated at 20V. The CD4510B and CD4516B consist of four synchronous clocked D-type flip-flops (with gating to provide T-type flip-flop capability) interconnected to form a counter. These counters can be reset to zero by a high level on the RESET line, or preset to any binary number present at the preset inputs by a high level on the PRESET ENABLE line. The CD4510B will return to a valid BCD count state within a maximum of two clock pulses in the up-count mode or four clock pulses in the down-count mode. If the CARRY-IN input is held low, the counter will increment or decrement on each positive clock transition. Synchronous cascading is achieved by connecting all clock inputs in parallel and connecting the CARRY-OUT of the less significant stage to the CARRY-IN of the more significant stage. The CD4510B and CD4516B can be cascaded in ripple mode by connecting CARRY-OUT to the clock of the next stage. If the UP/DOWN input is changed at terminal count, the CARRY-OUT must be gated with the clock, and the UP/DOWN input must be changed while the clock is high; this method provides a clean clock signal to subsequent counter stages. The CD4510B and CD4516B are available in the following packages: 16-pin plastic DIP (E suffix), 16-pin small outline package (NSR suffix), 16-pin thin shrink small outline package (PW and PWR suffixes); the CD4516B is additionally available in a 16-pin hermetic ceramic DIP (F3A suffix).

Caractéristiques

Traduction par IA
  • Medium-speed operation, typical clock frequency fCL of 8 MHz at 10V
  • Synchronous internal carry propagation
  • Reset and preset capability
  • 100% static current testing at 20V
  • 5V, 10V, and 15V parametric ratings
  • Standardized symmetrical output characteristics
  • Maximum input current 1μA at 18V over full package temperature range; 100nA at 18V, 25℃
  • Noise margin over full package temperature range: 1V at VDD = 5V; 2V at VDD = 10V; 2.5V at VDD = 15V
  • Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of B Series CMOS Devices"

Applications

Traduction par IA
  • Up/Down difference counting
  • Multistage synchronous counting
  • Multistage ripple counting
  • Synchronous frequency dividers