ST STEVAL-ISA044V5
| Produttore | |
| Cod. Prod. | STEVAL-ISA044V5 |
| Cod. LCSC | C5456150 |
| Imballo | - |
| Numero Cliente | |
| Attr. chiave | 3 A synchronous 900 kHz step-down DC-DC converter with inhibit function |
| Scheda Tecnica | ST STEVAL-ISA044V5 |
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Development Boards, Kits, Programmers/Evaluation Boards/DC/DC & AC/DC (Off-Line) SMPS Evaluation Boards | |
| Produttore | ST | |
| Imballo | - |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Development Boards, Kits, Programmers/Evaluation Boards/DC/DC & AC/DC (Off-Line) SMPS Evaluation Boards | |
| Produttore | ST |
| Tipo | Descrizione | |
|---|---|---|
| Imballo | - |
Descrizione
STEVAL-ISA044V5 is a demonstration board based on the ST1S10 device. The ST1S10, housed in a Power SO-8 ePad package, is a step-down DC-DC converter with disable function, optimized for high-voltage supply in LCD applications and low-voltage supply in digital core HDD applications. It serves as a drop-in replacement for high-current linear solutions where high power dissipation is a concern. The converter delivers up to 3A output over an input voltage range of 2.5V to 18.0V, with synchronous rectification eliminating the need for an external Schottky diode. The high internal switching frequency (900kHz) enables the use of compact SMT components, with output voltage set via a resistor divider requiring only one inductor and three capacitors. Current-mode PWM architecture and stable operation with low-ESR SMD ceramic capacitors achieve low output ripple. Under light load, the regulator automatically enters burst mode to maximize power conversion efficiency. When the SYNC pin is tied to ground or a fixed voltage (below 5.5V), the device switches at 900kHz; when an external clock is applied to the SYNC pin, the switching frequency can be synchronized from 400kHz to 1.2MHz. An integrated thermal shutdown circuit activates at 150°C. Cycle-by-cycle current limiting provides short-circuit output protection. Quiescent current in disable state is below 6μA.
Caratteristiche
- Input voltage range: 2.5V to 18.0V
- Maximum output current: 3A
- Internal switching frequency: 900kHz
- PWM mode operation with fixed frequency or synchronization to external 400kHz to 1.2MHz frequency
- Inhibit pin
- Quiescent current in inhibit state: less than 6μA
- RoHS compliant
Applicazioni
- High-voltage power supply for LCD applications
- Low-voltage power supply for digital core HDD applications
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Development Boards, Kits, Programmers/Evaluation Boards/DC/DC & AC/DC (Off-Line) SMPS Evaluation Boards | |
| Produttore | ST | |
| Imballo | - |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Development Boards, Kits, Programmers/Evaluation Boards/DC/DC & AC/DC (Off-Line) SMPS Evaluation Boards | |
| Produttore | ST |
| Tipo | Descrizione | |
|---|---|---|
| Imballo | - |
Descrizione
STEVAL-ISA044V5 is a demonstration board based on the ST1S10 device. The ST1S10, housed in a Power SO-8 ePad package, is a step-down DC-DC converter with disable function, optimized for high-voltage supply in LCD applications and low-voltage supply in digital core HDD applications. It serves as a drop-in replacement for high-current linear solutions where high power dissipation is a concern. The converter delivers up to 3A output over an input voltage range of 2.5V to 18.0V, with synchronous rectification eliminating the need for an external Schottky diode. The high internal switching frequency (900kHz) enables the use of compact SMT components, with output voltage set via a resistor divider requiring only one inductor and three capacitors. Current-mode PWM architecture and stable operation with low-ESR SMD ceramic capacitors achieve low output ripple. Under light load, the regulator automatically enters burst mode to maximize power conversion efficiency. When the SYNC pin is tied to ground or a fixed voltage (below 5.5V), the device switches at 900kHz; when an external clock is applied to the SYNC pin, the switching frequency can be synchronized from 400kHz to 1.2MHz. An integrated thermal shutdown circuit activates at 150°C. Cycle-by-cycle current limiting provides short-circuit output protection. Quiescent current in disable state is below 6μA.
Caratteristiche
- Input voltage range: 2.5V to 18.0V
- Maximum output current: 3A
- Internal switching frequency: 900kHz
- PWM mode operation with fixed frequency or synchronization to external 400kHz to 1.2MHz frequency
- Inhibit pin
- Quiescent current in inhibit state: less than 6μA
- RoHS compliant
Applicazioni
- High-voltage power supply for LCD applications
- Low-voltage power supply for digital core HDD applications
Conformità & Codici di Esportazione
| Tipo | Dettagli |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |
| Tipo | Dettagli |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| Tipo | Dettagli |
|---|---|
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |


