Littelfuse SP720ABTG
| Produttore | |
| Cod. Prod. | SP720ABTG |
| Cod. LCSC | C434726 |
| Imballo | SOIC-16 |
| Numero Cliente | |
| Attr. chiave | TVS Diode Arrays (SPADiodes) General Purpose ESD Protection |
| Scheda Tecnica | Littelfuse SP720ABTG |
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Circuit Protection/Transient Voltage Suppressors (TVS)/Mixed Technology | |
| Produttore | Littelfuse | |
| Imballo | SOIC-16 | |
| Clamping Voltage | 2V | |
| Peak Pulse Current (Ipp) | 3A@8/20us | |
| Operating temperature | -40℃~+105℃ | |
| Capacitance | 3pF | |
| Polarity | - | |
| Reverse Stand-Off Voltage (Vrwm) | 30V | |
| Number of Channels | - | |
| Type | ESD |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Circuit Protection/Transient Voltage Suppressors (TVS)/Mixed Technology | |
| Produttore | Littelfuse | |
| Imballo | SOIC-16 | |
| Clamping Voltage | 2V | |
| Peak Pulse Current (Ipp) | 3A@8/20us | |
| Operating temperature | -40℃~+105℃ |
| Tipo | Descrizione | |
|---|---|---|
| Capacitance | 3pF | |
| Polarity | - | |
| Reverse Stand-Off Voltage (Vrwm) | 30V | |
| Number of Channels | - | |
| Type | ESD |
Descrizione
The SP720 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection to sensitive input circuits. The SP720 has 2 protection SCR/Diode device structures per input. A total of 14 available inputs can be used to protect up to 14 external signal or bus lines. Over-voltage protection is from the IN (pins 1 - 7 and 9 - 15) to V+ or V-. The SCR structures are designed for fast triggering at a threshold of one +VBE diode threshold above V+ (Pin 16) or a -VBE diode threshold below V- (Pin 8). From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one VBE above V+. A similar clamp to V- is activated if a negative pulse, one VBE less than V-, is applied to an IN input. Standard ESD Human Body Model (HBM) Capability is:
Caratteristiche
- ESD Interface Capability for HBM Standards
- MIL STD 3015.7: 15kV
- IEC 61000 - 4 - 2, Direct Discharge, Single Input: 4kV (Level 2)
- IEC 61000 - 4 - 2, Direct Discharge, Two Inputs in Parallel: 8kV (Level 4)
- IEC 61000 - 4 - 2, Air Discharge: 15kV (Level 4)
- High Peak Current Capability
- IEC 61000 - 4 - 5 (8/20μs): ±3A
- Single Pulse, 100μs Pulse Width: ±2A
- Single Pulse, 4μs Pulse Width: ±5A
- Designed to Provide Over - Voltage Protection
- Single - Ended Voltage Range to: +30V
- Differential Voltage Range to: ±15V
- Fast Switching: 2ns Risetime
- Low Input Leakages: 1nA at 25°C (Typ)
- Low Input Capacitance: 3pF (Typ)
- An Array of 14 SCR/Diode Pairs
- Operating Temperature Range: -40°C to 105°C
Applicazioni
- Microprocessor/Logic Input Protection
- Analog Device Input Protection
- Data Bus Protection
- Voltage Clamp
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Circuit Protection/Transient Voltage Suppressors (TVS)/Mixed Technology | |
| Produttore | Littelfuse | |
| Imballo | SOIC-16 | |
| Clamping Voltage | 2V | |
| Peak Pulse Current (Ipp) | 3A@8/20us | |
| Operating temperature | -40℃~+105℃ | |
| Capacitance | 3pF | |
| Polarity | - | |
| Reverse Stand-Off Voltage (Vrwm) | 30V | |
| Number of Channels | - | |
| Type | ESD |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Circuit Protection/Transient Voltage Suppressors (TVS)/Mixed Technology | |
| Produttore | Littelfuse | |
| Imballo | SOIC-16 | |
| Clamping Voltage | 2V | |
| Peak Pulse Current (Ipp) | 3A@8/20us | |
| Operating temperature | -40℃~+105℃ |
| Tipo | Descrizione | |
|---|---|---|
| Capacitance | 3pF | |
| Polarity | - | |
| Reverse Stand-Off Voltage (Vrwm) | 30V | |
| Number of Channels | - | |
| Type | ESD |
Descrizione
The SP720 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection to sensitive input circuits. The SP720 has 2 protection SCR/Diode device structures per input. A total of 14 available inputs can be used to protect up to 14 external signal or bus lines. Over-voltage protection is from the IN (pins 1 - 7 and 9 - 15) to V+ or V-. The SCR structures are designed for fast triggering at a threshold of one +VBE diode threshold above V+ (Pin 16) or a -VBE diode threshold below V- (Pin 8). From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one VBE above V+. A similar clamp to V- is activated if a negative pulse, one VBE less than V-, is applied to an IN input. Standard ESD Human Body Model (HBM) Capability is:
Caratteristiche
- ESD Interface Capability for HBM Standards
- MIL STD 3015.7: 15kV
- IEC 61000 - 4 - 2, Direct Discharge, Single Input: 4kV (Level 2)
- IEC 61000 - 4 - 2, Direct Discharge, Two Inputs in Parallel: 8kV (Level 4)
- IEC 61000 - 4 - 2, Air Discharge: 15kV (Level 4)
- High Peak Current Capability
- IEC 61000 - 4 - 5 (8/20μs): ±3A
- Single Pulse, 100μs Pulse Width: ±2A
- Single Pulse, 4μs Pulse Width: ±5A
- Designed to Provide Over - Voltage Protection
- Single - Ended Voltage Range to: +30V
- Differential Voltage Range to: ±15V
- Fast Switching: 2ns Risetime
- Low Input Leakages: 1nA at 25°C (Typ)
- Low Input Capacitance: 3pF (Typ)
- An Array of 14 SCR/Diode Pairs
- Operating Temperature Range: -40°C to 105°C
Applicazioni
- Microprocessor/Logic Input Protection
- Analog Device Input Protection
- Data Bus Protection
- Voltage Clamp
C434726 Libreria EasyEDA
Conformità & Codici di Esportazione
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541100000 |
| USHTS | 8541100040 |
| TARIC | 8541100000 |
| CAHTS | 8541100090 |
| BRHTS | 85411011 |
| INHTS | 85411000 |
| MXHTS | 8541.10.01 |
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541100000 |
| USHTS | 8541100040 |
| TARIC | 8541100000 |
| Tipo | Dettagli |
|---|---|
| CAHTS | 8541100090 |
| BRHTS | 85411011 |
| INHTS | 85411000 |
| MXHTS | 8541.10.01 |



