LCSC Electronics logoLCSC Electronics svg logo
로그인
USD
NXP TFA9879HN/N1,157 product image
  • TFA9879HN/N1,157 thumbnail 1
  • TFA9879HN/N1,157 thumbnail 2
  • TFA9879HN/N1,157 thumbnail 3
  • 핀아웃
  • 풋프린트
실제 제품과 다를 수 있음

NXP TFA9879HN/N1,157

제조업체
제조사 품번
TFA9879HN/N1,157
LCSC 번호
C2838168
포장
HVQFN-24-EP(4x4)
고객 번호
주요 제원
Mono BTL class-D audio amplifier with digital input
데이터시트NXP TFA9879HN/N1,157
RoHS 준수2개 문서 이용 가능
모든 주문 보장
100% 정품 · 30일 반품 또는 교환

제품 사양

전체
타입설명
카테고리Integrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers
제조업체NXP
포장HVQFN-24-EP(4x4)
Quiescent Current-
Voltage - Supply2.5V~5.5V
Total Harmonic Distortion + Noise (THD+N)0.02%
FeaturesFilterless architecture;Built-in audio processing;Digitally programmable gain;Integrated PLL;Automatic mute/no-noise switch;Enable/shutdown function
Operating Temperature-
Number of Inputs-
Signal-to-Noise Ratio94dB
Speaker Channels1-Channel
Efficiency92%
Output Power2.75W×1@4Ω
ClassClass D
Power Supply Rejection Ratio (PSRR)80dB
도움말 및 피드백유사 제품 보기 (0) >

개요

AI 번역

The TFA9879 is a high-efficiency filter-free mono class-D audio amplifier with two separate digital inputs for mobile applications. The TFA9879 contains a processor that supports a range of sound processing features including a 5-band parametric equalizer, separate bass and treble control, a dynamic range compressor, soft clip control and volume control. Excellent audio performance combined with high Power Supply Rejection Ratio (PSRR) is achieved through the use of a closed loop configuration. Two independent digital audio inputs (I2S -bus / PCM / IOM2) are available for connecting both a baseband and a multimedia processor. The TFA9879 is available in a HVQFN24 package. The TFA9879 is a high-efficiency mono Bridge Tied Load (BTL) class-D amplifier with digital audio inputs. It supports all commonly used formats.

주요 특징

AI 번역
  • Closed loop amplifier for: High power supply rejection ratio, Excellent audio performance
  • Digital input for high RF immunity
  • High efficiency for maximizing battery life
  • Wide supply voltage range (fully operational from 2.5 V to 5.5 V)
  • Delivers high output power into 4 Ω and 8 Ω load impedances
  • Phase-Locked Loop (PLL); no system clock required
  • Protection including diagnostics via I2C -bus: OverCurrent Protection (OCP) to protect against short circuits across the speaker, to the supply line or to ground, OverTemperature Protection (OTP), Digital inputs protected with UnderFrequency Protection (UFP), OverFrequency Protection (OFP) and Invalid Bit-clock Protection (IBP)
  • ‘Pop noise’ free at power-up/power down, during sample rate switching and when switching between digital inputs
  • Four separate I2C -bus addresses for multi-channel applications
  • Mono BTL class-D audio amplifier with digital input
  • 1.8 V/ 3.3 V tolerant digital inputs
  • Only three external components required
  • Digital volume control (-70 dB to +24 dB)
  • Digital parametric 5-band equalizer
  • Bass and treble control (-18 dB to +18 dB)
  • Dynamic range compressor: Programmable attack and release levels, Programmable attack and release rates
  • Soft and hard mute control
  • Programmable DC blocking via high-pass filter
  • Power limiter (0 dB to -124 dB in 0.5 dB steps)
  • Zero crossing volume control
  • Stereo-to-mono down-mix function
  • I2S formats (fs = 8 kHz to 96 kHz): Philips standard I2S -bus, Japanese I2S -bus MSB-justified, Sony I2S -bus LSB-justified
  • PCM / IOM2 formats (fs = 8 kHz or fs = 16 kHz): Long frame sync, Short frame sync

응용 분야

AI 번역
  • Mobile phones
  • Portable Navigation Devices (PND)
  • PDAs
  • Notebooks
  • Portable gaming devices
  • MP3 and MP4 players