TI BQ25756RRVR
| Produttore | |
| Cod. Prod. | BQ25756RRVR |
| Cod. LCSC | C19272232 |
| Imballo | VQFN-36(5x6) |
| Numero Cliente | |
| Attr. chiave | Independent/I2C-controlled, 1-to-14-cell bidirectional buck/boost battery charge controller |
| Scheda Tecnica | TI BQ25756RRVR |
| Conformità RoHS | 2 documenti disponibili |
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Chargers | |
| Produttore | TI | |
| Imballo | VQFN-36(5x6) | |
| End-Off Voltage | - | |
| Voltage - Supply | 4.2V~70V | |
| Quiescent Current | 17uA | |
| Operating Temperature | -40℃~+125℃ | |
| Number of Cells | 1~14 | |
| Interface | I2C | |
| Features | Constant current charging;Constant voltage charging;Trickle charging;Automatic recharge;Charge termination;Programmable charging current;Overcurrent Protection;Overvoltage Protection;Soft-start | |
| Battery Temperature Detection | Support | |
| 0V Battery Charge | - | |
| Type of Battery | Lithium Battery;LiFePO4 Battery | |
| The Chip Type | Charging IC | |
| Balance Current | - | |
| Charge Current - Max | 20A | |
| Charging Saturation Voltage | - |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Chargers | |
| Produttore | TI | |
| Imballo | VQFN-36(5x6) | |
| End-Off Voltage | - | |
| Voltage - Supply | 4.2V~70V | |
| Quiescent Current | 17uA | |
| Operating Temperature | -40℃~+125℃ | |
| Number of Cells | 1~14 | |
| Interface | I2C |
| Tipo | Descrizione | |
|---|---|---|
| Features | Constant current charging;Constant voltage charging;Trickle charging;Automatic recharge;Charge termination;Programmable charging current;Overcurrent Protection;Overvoltage Protection;Soft-start | |
| Battery Temperature Detection | Support | |
| 0V Battery Charge | - | |
| Type of Battery | Lithium Battery;LiFePO4 Battery | |
| The Chip Type | Charging IC | |
| Balance Current | - | |
| Charge Current - Max | 20A | |
| Charging Saturation Voltage | - |
Descrizione
The BQ25756 is a wide-input-voltage, switch-mode buck/boost lithium-ion, lithium-polymer, or lithium-iron-phosphate battery charging controller with bidirectional power flow support. This device not only provides precise charging current and charging voltage regulation but also offers automatic pre-charging regulation, charging termination, and charging status indication, enabling efficient battery charging over a wide voltage range. The device integrates all loop compensation functions of the buck/boost converter, thus providing an easy-to-use, high-density solution. In reverse mode, the device draws power from the battery and regulates the input terminal voltage through an added constant current loop to achieve protection, thereby supporting USB-PD EPR power profiles. In addition to the I2C host-controlled charging mode, the device also supports an independent charging mode through resistor-programmable limits. The input current, charging current, and charging voltage regulation targets can be set via the ILIM_HIZ, ICHG, and FB pins respectively.
Caratteristiche
- Wide battery voltage operating range: up to 70V, supporting multi-chemistry batteries: 1-cell to 14-cell Li-ion charging profile, 1-cell to 16-cell LiFePO₄ charging profile
- Synchronous buck/boost charging controller with NFET drivers
- Adjustable switching frequency: 200kHz to 600kHz
- Optional external clock synchronization
- Integrated loop compensation with soft-start
- Optional gate driver supply input for improved efficiency
- Automatic MPPT for solar charging
- Buck-only mode
- Bidirectional converter operation (reverse mode) supporting USB-PD EPR
- Adjustable input voltage (VAC) regulation range: 3.3V to 65V in 20mV steps
- Adjustable input current regulation (RAC_SNS) using 5mΩ resistor: 400mA to 20A in 50mA steps
- ±0.5% charge voltage regulation
- ±3% charge current regulation
- ±3% input current regulation
- I2C control for superior system performance with per-battery programmable options
- Hardware-adjustable input and output current limits
- Integrated 16-bit ADC for voltage, current, and temperature monitoring
- Adjustable input overvoltage and undervoltage protection
- Battery overvoltage and overcurrent protection
- Charge safety timer
- Battery short-circuit protection
- Thermal shutdown
- Status outputs: adapter present status (PG), charger operating status (STAT1, STAT2)
- 36-pin 5mm × 6mm QFN package
Applicazioni
- E-kick scooters, e-bikes
- Cordless power tools, garden tools
- Robotic lawn mowers
- Portable power stations
- Cordless vacuum cleaners, robotic vacuum cleaners
- Solar chargers
- USB-PD EPR (Extended Power Range)
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Chargers | |
| Produttore | TI | |
| Imballo | VQFN-36(5x6) | |
| End-Off Voltage | - | |
| Voltage - Supply | 4.2V~70V | |
| Quiescent Current | 17uA | |
| Operating Temperature | -40℃~+125℃ | |
| Number of Cells | 1~14 | |
| Interface | I2C | |
| Features | Constant current charging;Constant voltage charging;Trickle charging;Automatic recharge;Charge termination;Programmable charging current;Overcurrent Protection;Overvoltage Protection;Soft-start | |
| Battery Temperature Detection | Support | |
| 0V Battery Charge | - | |
| Type of Battery | Lithium Battery;LiFePO4 Battery | |
| The Chip Type | Charging IC | |
| Balance Current | - | |
| Charge Current - Max | 20A | |
| Charging Saturation Voltage | - |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Chargers | |
| Produttore | TI | |
| Imballo | VQFN-36(5x6) | |
| End-Off Voltage | - | |
| Voltage - Supply | 4.2V~70V | |
| Quiescent Current | 17uA | |
| Operating Temperature | -40℃~+125℃ | |
| Number of Cells | 1~14 | |
| Interface | I2C |
| Tipo | Descrizione | |
|---|---|---|
| Features | Constant current charging;Constant voltage charging;Trickle charging;Automatic recharge;Charge termination;Programmable charging current;Overcurrent Protection;Overvoltage Protection;Soft-start | |
| Battery Temperature Detection | Support | |
| 0V Battery Charge | - | |
| Type of Battery | Lithium Battery;LiFePO4 Battery | |
| The Chip Type | Charging IC | |
| Balance Current | - | |
| Charge Current - Max | 20A | |
| Charging Saturation Voltage | - |
Descrizione
The BQ25756 is a wide-input-voltage, switch-mode buck/boost lithium-ion, lithium-polymer, or lithium-iron-phosphate battery charging controller with bidirectional power flow support. This device not only provides precise charging current and charging voltage regulation but also offers automatic pre-charging regulation, charging termination, and charging status indication, enabling efficient battery charging over a wide voltage range. The device integrates all loop compensation functions of the buck/boost converter, thus providing an easy-to-use, high-density solution. In reverse mode, the device draws power from the battery and regulates the input terminal voltage through an added constant current loop to achieve protection, thereby supporting USB-PD EPR power profiles. In addition to the I2C host-controlled charging mode, the device also supports an independent charging mode through resistor-programmable limits. The input current, charging current, and charging voltage regulation targets can be set via the ILIM_HIZ, ICHG, and FB pins respectively.
Caratteristiche
- Wide battery voltage operating range: up to 70V, supporting multi-chemistry batteries: 1-cell to 14-cell Li-ion charging profile, 1-cell to 16-cell LiFePO₄ charging profile
- Synchronous buck/boost charging controller with NFET drivers
- Adjustable switching frequency: 200kHz to 600kHz
- Optional external clock synchronization
- Integrated loop compensation with soft-start
- Optional gate driver supply input for improved efficiency
- Automatic MPPT for solar charging
- Buck-only mode
- Bidirectional converter operation (reverse mode) supporting USB-PD EPR
- Adjustable input voltage (VAC) regulation range: 3.3V to 65V in 20mV steps
- Adjustable input current regulation (RAC_SNS) using 5mΩ resistor: 400mA to 20A in 50mA steps
- ±0.5% charge voltage regulation
- ±3% charge current regulation
- ±3% input current regulation
- I2C control for superior system performance with per-battery programmable options
- Hardware-adjustable input and output current limits
- Integrated 16-bit ADC for voltage, current, and temperature monitoring
- Adjustable input overvoltage and undervoltage protection
- Battery overvoltage and overcurrent protection
- Charge safety timer
- Battery short-circuit protection
- Thermal shutdown
- Status outputs: adapter present status (PG), charger operating status (STAT1, STAT2)
- 36-pin 5mm × 6mm QFN package
Applicazioni
- E-kick scooters, e-bikes
- Cordless power tools, garden tools
- Robotic lawn mowers
- Portable power stations
- Cordless vacuum cleaners, robotic vacuum cleaners
- Solar chargers
- USB-PD EPR (Extended Power Range)
C19272232 Libreria EasyEDA
Conformità & Codici di Esportazione
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Tipo | Dettagli |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



