LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD

TI BQ24072RGTR

Produttore
Cod. Prod.
BQ24072RGTR
Cod. LCSC
C140288
Imballo
QFN-16-EP(3x3)
Numero Cliente
Attr. chiave
1.5-A USB-Friendly Li-lon Battery Charger and Power-Path Management IC
Scheda TecnicaTI BQ24072RGTR
Conformità RoHS2 documenti disponibili
Parti alternative5
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Battery Chargers
ProduttoreTI
ImballoQFN-16-EP(3x3)
End-Off Voltage-
Interface-
Voltage - Supply4.35V~6.6V
Quiescent Current1.5mA
Battery Temperature DetectionSupport
0V Battery Charge-
Operating Temperature-40℃~+125℃
Type of BatteryLithium Battery
The Chip TypeCharging IC
Number of Cells1
Balance Current-
Charge Current - Max1.5A
Charging Saturation Voltage4.2V

Descrizione

Traduzione AI

The bq2407x series of devices are integrated Li-Ion linear chargers and system power path management devices targeted at space-limited portable applications. The devices operate from either a USB port or an AC adapter and support charge currents up to 1.5 A. The input voltage range with input overvoltage protection supports unregulated adapters. The USB input current limit accuracy and start up sequence allow the bq2407x to meet USB-IF inrush current specifications. Additionally, the input dynamic power management (VIN-DPM) prevents the charger from crashing incorrectly configured USB sources.

The bq2407x features dynamic power path management (DPPM) that powers the system while simultaneously and independently charging the battery. The DPPM circuit reduces the charge current when the input current limit causes the system output to fall to the DPPM threshold; thus, supplying the system load at all times while monitoring the charge current separately. This feature reduces the number of charge and discharge cycles on the battery, allows for proper charge termination and enables the system to run with a defective or absent battery pack.

Caratteristiche

Traduzione AI
  • Fully Compliant USB Charger
  • Selectable 100-mA and 500-mA Maximum Input Current
  • 100-mA Maximum Current Limit Ensures Compliance to USB-IF Standard
  • Input-Based Dynamic Power Management (VIN-DPM) for Protection Against Poor USB Sources
  • 28-V Input Rating with Overvoltage Protection
  • Integrated Dynamic Power Path Management (DPPM) Function Simultaneously and Independently Powers the System and Charges the Battery
  • Supports up to 1.5-A Charge Current with Current Monitoring Output (ISET)
  • Programmable Input Current Limit up to 1.5 A for Wall Adapters
  • System Output Tracks Battery Voltage (bq24072)
  • Programmable Termination Current (bq24074)
  • Battery Disconnect Function with SYSOFF Input (bq24075, bq24079)
  • Programmable Pre-Charge and Fast-Charge Safety Timers
  • Reverse Current, Short-Circuit and Thermal Protection
  • NTC Thermistor Input
  • Proprietary Start-up Sequence Limits Inrush Current
  • Status Indication – Charging/Done, Power Good

Applicazioni

Traduzione AI
  • Smart Phones
  • Portable Media Players
  • Portable Navigation Devices
  • Low-Power Handheld Devices