LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD

TI BQ25890RTWR

Produttore
Cod. Prod.
BQ25890RTWR
Cod. LCSC
C130451
Imballo
WQFN-24-EP(4x4)
Numero Cliente
Attr. chiave
Single-cell fast charger with I²C control, adopting MaxCharge technology to achieve high input voltage and adjustable voltage USB On-the-Go boost mode
Scheda TecnicaTI BQ25890RTWR
Conformità RoHS2 documenti disponibili
Parti alternative5
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Battery Chargers
ProduttoreTI
ImballoWQFN-24-EP(4x4)
End-Off Voltage-
Voltage - Supply3.9V~14V
Quiescent Current12uA
Operating Temperature-40℃~+85℃
Number of Cells1
InterfaceI2C
FeaturesConstant current charging;Overcurrent Protection;Programmable charging current
Battery Temperature DetectionSupport
0V Battery ChargeSupport
Type of BatteryLithium Battery
The Chip TypeCharging IC
Balance Current-
Charge Current - Max5A
Charging Saturation Voltage-

Descrizione

Traduzione AI

The bq25890 and bq25892 are highly integrated 5A switch-mode battery charging management and system power path management devices suitable for lithium-ion and lithium-polymer batteries. These devices support high-input-voltage fast charging. Their low-impedance power paths optimize the efficiency of switch-mode operation, reduce battery charging time, and extend battery life during the discharge phase. The I²C serial interface with charging and system settings makes these devices a truly flexible solution.

Caratteristiche

Traduzione AI
  • Up to 93% charging efficiency at 2A charge current; up to 91% at 3A charge current
  • Optimized for high-voltage input (9V/12V)
  • Low-power PFM mode for light-load operation
  • USB On-the-Go (OTG) with adjustable output voltage range of 4.5V to 5.5V
  • Selectable 500KHz/1.5MHz boost converter with up to 2.4A output current
  • 93% boost efficiency at 5V/1A output
  • Accurate discontinuous-mode overcurrent protection
  • Single input supporting USB input and adjustable high-voltage adapter
  • Input voltage range: 3.9V to 14V
  • Input current limit (100mA to 3.25A, 50mA resolution) supporting USB2.0, USB3.0 standards and high-voltage adapters
  • Maximum power tracking via input voltage limit (up to 14V) for various adapters
  • Auto-detection of USB SDP, CDP, DCP, and non-standard adapters (bq25890)
  • Input Current Optimizer (ICO) for maximum input power without overloading the adapter
  • IR compensation (IRCOMP) between charger output and battery terminal
  • Maximum battery discharge efficiency via 11mΩ battery discharge MOSFET with up to 9A discharge current
  • Integrated ADC for system monitoring (voltage, temperature, and charge current)
  • Instant-on operation with no battery or deeply discharged battery
  • Ideal diode operation in battery management mode
  • BATFET control supporting transport mode, wake-up, and full system reset
  • Flexible autonomous and I²C modes for optimal system performance
  • High integration including all MOSFETs, current sensing, and loop compensation
  • ±5% charge current regulation
  • ±7.5% input current regulation
  • Battery temperature sensing for charge mode and boost mode
  • Thermal regulation and thermal shutdown

Applicazioni

Traduzione AI
  • Smartphones
  • Tablets
  • Portable networking devices