MAXIM DS18S20+T&R

The DS18S20 digital thermometer provides 9-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18S20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. In addition, the DS18S20 can derive power directly from the data line ("parasite power"), eliminating the need for an external power supply. Each DS18S20 has a unique 64-bit serial code, which allows multiple DS18S20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18S20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control systems.

• Unique 1-Wire Interface Requires Only One Port Pin for Communication
• Maximize System Accuracy in Broad Range of Thermal Management Applications
• Measures Temperatures from -55℃ to +125℃ (-67°F to +257°F)
• ±0.5℃ Accuracy from -10℃ to +85℃
• 9-Bit Resolution
• No External Components Required
• Parasite Power Mode Requires Only 2 Pins for Operation (DQ and GND)
• Simplifies Distributed Temperature-Sensing Applications with Multidrop Capability
• Each Device Has a Unique 64-bit Serial Code Stored in On-Board ROM
• Flexible User-Definable Nonvolatile (NV) Alarm Settings with Alarm Search Command Identifies Devices with Temperatures Outside Programmed Limits
• Available in 8-Pin SO (150 mils) and 3-Pin TO-92 Packages

• Thermostatic Controls
• Industrial Systems
• Consumer Products
• Thermometers
• Thermally Sensitive Systems