LCSC Electronics logoLCSC Electronics svg logo
Connexion
USD

ADI AD8220ARMZ-R7

Fabricant
Réf. Fab.
AD8220ARMZ-R7
Réf. LCSC
C150944
Condit.
MSOP-8
Numéro Client
Caract. clés
JFET input instrumentation amplifier with rail-to-rail output
Fiche TechniqueADI AD8220ARMZ-R7
Conformité RoHS1 documents disponibles
Pièces alternatives1
Garantie sur chaque commande
100% Authentique · Retour ou échange sous 30 Jours

Spécifications du Produit

Tout
TypeDescription
CatégorieIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
FabricantADI
Condit.MSOP-8
Settling time5us
output type-
Output Current15mA
Number of ChannelsSingle-channel
Vos - Input Offset Voltage300uV
Slew Rate2V/us
Input Offset Current(Ios)0.6pA
Operating Temperature-40℃~+85℃
Common Mode Rejection Ratio(CMRR)100dB
Ib - Input Bias Current25pA
Input Offset Voltage Drift(Vos TC)10uV/℃
-3dB Bandwidth1.5MHz
Quiescent Current750uA
Gain Error0.04%
FeaturesExternal resistor gain;ESD Protection
Input Voltage Noise Density14nV/√Hz@1kHz
Dual Supply-18V~-2.25V;2.25V~18V
Rail to RailRail-to-rail output
Single Supply4.5V~36V

Description

Traduction par IA

The AD8220 is the first single-supply, JFET-input instrumentation amplifier available in an MSOP package. It is designed for high-performance, portable instrumentation, featuring a minimum DC CMRR of 86 dB and a minimum CMRR of 80 dB at 5 kHz with G = 1. The maximum input bias current is 10 pA, typically remaining below 300 pA across the full industrial temperature range. Despite its JFET input architecture, the AD8220 has a typical noise corner frequency of only 10 Hz. It can be powered by either ±18 V dual supplies or a +5 V single supply. At the low supply voltages common in portable applications, its rail-to-rail output stage maximizes dynamic range. Single-supply operation at 5 V eliminates the need for higher-voltage dual supplies. With a maximum quiescent current of only 750 μA, the AD8220 is ideal for battery-powered devices. Gain is set by a single resistor over a range of 1 to 1000. Increasing the gain also increases the CMRR. Configuring the AD8220 at higher gains benefits measurement applications that require higher CMRR when reading small signals. The reference pin allows users to offset the output voltage, which is useful when interfacing with analog-to-digital converters. The AD8220 is available in an MSOP package, occupying approximately half the board area of an SOIC package. Grade A and Grade B devices are rated for the -40°C to +85°C industrial temperature range, while Grade W devices are rated for the -40°C to +125°C automotive temperature range.

Caractéristiques

Traduction par IA
  • Low input current: Input bias current: 10 pA (max, Grade B); Input offset current: 0.6 pA (max, Grade B)
  • High CMRR: CMRR: 100 dB (min, G = 70, Grade B); CMRR: 80 dB (min, to 5 kHz, G = 1, Grade B)
  • Excellent AC characteristics, low power consumption: Bandwidth: 1.5 MHz (G = 1); Input noise: 14 nV/√Hz (1 kHz); Slew rate: 2 V/μs; Quiescent supply current: 750 μA (max)
  • Versatility: MSOP package; Rail-to-rail output; Input voltage range below negative supply rail; 4 kV ESD protection; 4.5 V to 36 V single supply, ±2.25 V to ±18 V dual supply; Gain set by single resistor (G = 1 to 1000)
  • Qualified for automotive applications

Applications

Traduction par IA
  • Medical instruments
  • Precision data acquisition systems
  • Sensor interfaces