LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
ADI LTC3729EG#PBF product image
  • LTC3729EG#PBF thumbnail 1
  • LTC3729EG#PBF thumbnail 2
  • Pinbelegung
  • Footprint
Abbildung ähnlich

ADI LTC3729EG#PBF

Hersteller
Herst.-Teilenr.
LTC3729EG#PBF
LCSC-Nr.
C107888
Verp.
SSOP-28-208mil
Kundennummer
Hauptmerkm.
2 Adjustable Step-down type SSOP-28-208mil DC DC Switching Controllers RoHS
DatenblattADI LTC3729EG#PBF
RoHS-Konformität1 Dokumente verfügbar
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 4.8681$ 4.87
10+$ 4.7656$ 47.66
30+$ 4.6982$ 140.95
100+$ 4.6294$ 462.94
Standardgehäuse47/Full Tube
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/DC DC Switching Controllers
HerstellerADI
Verp.SSOP-28-208mil
Operating Temperature-40℃~+85℃@(TA)
Synchronous RectifierYes
FeaturesOutput voltage differential sensing;Frequency synchronization;Built-in LDO regulator;Adjustable soft-start;Operating status indication;Overcurrent Protection
Output Current-
Number of Channels2
TopologyBuck
Frequency - Switching550kHz
Operating Voltage4V~36V
Output TypeAdjustable
Switch tube (built-in/external)External
Output Voltage-
FunctionStep-down type
Quiescent Current580uA

Beschreibung

KI-Übersetzung

The LTC3729 is a multiple phase, synchronous step‑down current mode switching regulator controller that drives N‑channel external power MOSFET stages in a phase‑lockable fixed frequency architecture. The PolyPhase controller drives its two output stages out of phase at frequencies up to 550kHz to minimize the RMS ripple currents in both input and output capacitors. The output clock signal allows expansion for up to 12 evenly phased controllers for systems requiring 15A to 200A of output current. The multiple phase technique effectively multiplies the fundamental frequency by the number of channels used, improving transient response while operating each channel at an optimum frequency for efficiency. Thermal design is also simplified. An internal differential amplifier provides true remote sens‑ ing of the regulated supply’s positive and negative output terminals as required for high current applications. A RUN/SS pin provides both soft-start and optional timed, short-circuit shutdown. Current foldback limits MOSFET dissipation during short-circuit conditions when the overcurrent latchoff is disabled. OPTI-LOOP compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. The LTC3729 includes a power good output pin that indicates when the output is within ±7.5% of the designed set point.

Merkmale

KI-Übersetzung
  • Wide VIN Range: 4V to 36V Operation
  • Reduces Required Input Capacitance and Power Supply Induced Noise
  • ±1% Output Voltage Accuracy
  • Phase-Lockable Fixed Frequency: 250kHz to 550kHz
  • True Remote Sensing Differential Amplifier
  • PolyPhase Extends from Two to Twelve Phases
  • Reduces the Size and Value of Inductors
  • Current Mode Control Ensures Current Sharing
  • 1.1MHz Effective Switching Frequency (2-Phase)
  • OPTI-LOOP Compensation Reduces COUT
  • Power Good Output Voltage Indicator
  • Very Low Dropout Operation: 99% Duty Cycle
  • Adjustable Soft-Start Current Ramping
  • Internal Current Foldback Plus Shutdown Timer
  • Overvoltage Soft-Latch Eliminates Nuisance Trips
  • Available in 5mm×5mm OFN and 28-Lead SSOP Packages

Anwendungen

KI-Übersetzung
  • Desktop Computers/Servers
  • Large Memory Arrays
  • DC Power Distribution Systems