onsemi NB7NPQ701MMTTBG

The NB7NPQ701M is a 3.3 V single channel re−driver for USB 3.1 Gen 1 and USB 3.1 Gen 2 applications that supports both 5 Gbps and 10 Gbps data rates. Signal integrity degrades from PCB traces, transmission cables, and inter−symbol interference (ISI). The NB7NPQ701M compensates for these losses by engaging varying levels of equalization at the input receiver and de−emphasis on output driver. The output transmitter circuitry provides user selectable de−emphasis and output amplitude settings to create the best eye openings for the outgoing data signals. The NB7NPQ701M features an intelligent LFPS circuit. This circuit senses the low frequency signals and automatically disables driver de−emphasis for full USB 3.1 Gen 1 and USB 3.1 Gen 2 compliances. After power up, the NB7NPQ701M periodically checks both of the TX output pairs for a receiver connection. When the receiver is detected the RX termination becomes enabled and the NB7NPQ701M is set to perform the re−driver function. The NB7NPQ701M comes in a small, 2 x 2 mm WDFN8 package and is specified to operate across the entire industrial temperature range, -40°C to 85°C.

• 3.3 V±5% Power Supply
• Device Supports USB 3.1 Gen 1 and USB 3.1 Gen 2 Data Rates
• Automatic LFPS De−Emphasis Control
• Automatic Receiver Termination Detection
• Integrated Input and Output Termination
• Selectable Equalization, De−Emphasis, and Output Swing
• Hot−Plug Capable
• ESD Protection ±4 kV HBM
• Operating Temperature Range: -40°C to 85°C
• Small 2 x 2 x 0.8 mm WDFN8 Package
• This is a Pb−Free Device

• Computer and Laptop
• Docking Station and Dongle
• Active Cable, Back Planes
• Gaming Console, Smart T.V.
• Servers and Storage